Lutron Claro Switch 15 A, Biscuit (SC-3PS-BI)

Product Overview

The Lutron SC-3PS-BI is a Claro single‑gang wall switch rated for 15 A. It supports single‑pole or 3‑way wiring and is finished in Biscuit.

Designed with a large paddle actuator, the SC-3PS-BI provides a positive on/off feel and is intended for standard lighting or fan loads in residential and similar installations.

Key Features

• 15 A rated switching capacity
• Configurable for single‑pole or 3‑way operation (multi‑location control with companion devices)
• Large paddle actuator for clear on/off tactile feedback
• Claro series aesthetic and form factor, Biscuit finish
• Fits a standard single‑gang wall box

Function and basic use

The SC-3PS-BI is a manual paddle wall switch that controls one circuit. It provides straightforward on/off switching for lighting or fan loads and can be wired for single‑pole control (one location) or 3‑way control (two locations).

• Acts as a standard on/off switch—no dimming or electronic control built into this model
• Large paddle actuator for a clear tactile response when switching

Electrical rating and wiring

This Claro switch is rated for 15 A. It supports single‑pole and 3‑way wiring configurations, allowing multi‑location control when used with the appropriate companion device and wiring.

• Amperage: 15 A
• Pole/configuration: Single‑Pole or 3‑Way

Typical applications

Use the SC-3PS-BI for switching lighting or fan loads in residential settings and similar light commercial applications. It is suitable for both new‑construction and retrofit/replacement projects where a standard paddle switch is required.

• Residential lighting circuits
• Fan on/off control
• Multi‑location switching with companion devices
• Replacement of existing single‑gang paddle switches

Mounting, finish, and compatibility notes

The switch is designed to mount in a standard single‑gang wall box and is finished in Biscuit to match common interior palettes. Confirm the model number, electrical rating, and finish match the installation requirements before ordering or installing.

• Finish: Biscuit
• Mounts in single‑gang wall box
• Genuine Lutron Claro series component for system‑matched installations

Before You Order

Confirm the model number, amperage rating, and finish are appropriate for your installation. Verify wiring configuration (single‑pole vs. 3‑way) and compatibility with any companion devices before ordering.

• Confirm device rating (15 A) matches your circuit load requirements
• Confirm finish (Biscuit) matches other devices or trim in the space
• Confirm quantity and model number (SC-3PS-BI) before placing an order

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Claro Switch 15 A, Biscuit (SC-3PS-BI). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.