Lutron Maestro Switch 8 A, Palladium (RRD-8S-DV-PD)

Product Overview

The Lutron Maestro RRD-8S-DV-PD is a Palladium-finish switch rated for loads up to 8 A at 120–277 V. It requires no neutral and mounts in a single-gang wall box.

Its large paddle actuator provides on/off operation. The product information also describes multi-location control with companion devices; confirm device compatibility for the intended installation.

Key Features

• 8 A rating at 120–277 V
• No neutral required
• Designed for a single-gang wall box
• Large paddle actuator for on/off operation
• Palladium finish

Electrical Rating and Neutral Requirement

The RRD-8S-DV-PD is rated for 8 A at 120–277 V and does not require a neutral. Confirm that the connected load meets the minimum wattage requirement for no-neutral operation before installation.

Wall-Box Installation

This switch mounts in a single-gang wall box. Its no-neutral design is specified for use in existing 2-wire boxes; verify that the existing wiring and connected load are suitable before installation.

Multi-Location Control

The product information identifies multi-location control with companion devices as an application. Confirm the appropriate companion device and system compatibility for the planned setup.

Before You Order

Confirm the model number and quantity required before ordering. Check that the load meets the minimum wattage requirement for no-neutral operation and verify companion-device compatibility if using multi-location control.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Maestro Switch 8 A, Palladium (RRD-8S-DV-PD). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.