Lutron Nova T Dimmer Switch 600 W, Sienna (NTELV-600-SI)

Product Overview

The Lutron NTELV-600-SI is a Nova T single-pole wall dimmer rated for 600 W at 120 V. It uses ELV dimming and requires a neutral connection at the switch box.

Designed for installation in a standard single-gang electrical box and finished in Sienna.

Key Features

• 600 W load capacity at 120 V
• ELV (electronic low-voltage) dimming
• Neutral required
• Single-pole configuration
• Sienna finish

What this dimmer does

The NTELV-600-SI provides on/off control and ELV dimming for a single lighting circuit. It is intended for installation in a standard single-gang wall box and operates as a single-pole control.

Load rating and dimming type

Rated for up to 600 watts at 120 V and uses ELV (electronic low-voltage) dimming.

• Rated load: 600 W at 120 V
• Dimming type: ELV

Compatibility and installation notes

A neutral conductor is required at the switch box. Match the dimmer's ELV type and total wattage rating to the connected fixtures and drivers.

• Neutral conductor required
• Match total connected wattage to 600 W rating
• Verify fixture/driver compatibility with ELV dimming

Mounting and finish

Mounts in a standard single-gang electrical box and is finished in Sienna.

• Configuration: Single-pole
• Finish: Sienna

Before you order

Confirm the model and that a neutral conductor is present at the switch location.

• Verify total circuit load does not exceed 600 W
• Confirm ELV dimming is appropriate for the connected fixtures

Before You Order

Verify a neutral conductor is present at the switch location and that the circuit's total connected wattage does not exceed 600 W.

• Confirm NTELV-600-SI is the required model and finish
• Ensure connected fixtures/drivers are compatible with ELV dimming

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Nova T Dimmer Switch 600 W, Sienna (NTELV-600-SI). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.