Lutron Nova T Dimmer Switch 20 A, (NT-1PS-AL)

Product Overview

The Lutron NT-1PS-AL is a Nova T single‑pole dimmer switch rated for 20 A at 120/277 V, finished in Almond. It mounts in a standard single‑gang wall box.

This is a genuine Lutron Nova T series component intended for use in lighting control installations.

Key Features

• 20 A rating at 120/277 V
• Single‑pole configuration
• Almond finish
• Mounts in a standard single‑gang wall box

What this dimmer does

The NT-1PS-AL is a single‑pole dimmer switch that provides on/off control and continuous dimming for a single lighting circuit. It is designed to replace a standard single‑pole switch and fits a single‑gang wall box.

Where to use the NT-1PS-AL

This model is suitable for applications requiring a 20 A single‑pole dimmer in an Almond finish, such as residential circuits, retrofits, or new construction where a dimmer with this rating is specified.

• Residential rooms and similar single‑circuit installations
• Lighting-control retrofits and new construction using single‑gang boxes

Electrical rating and load considerations

The NT-1PS-AL is rated 20 A at 120/277 V. Match the dimmer's load type and total wattage to the connected fixtures to ensure the combined load does not exceed the device rating.

• Rating: 20 A
• Voltage: 120/277 V
• Configuration: Single‑pole

Mounting and physical integration

The control mounts in a standard single‑gang wall box and is finished in Almond to coordinate with matching wallplates.

• Mounts in single‑gang box
• Finish: Almond

Before You Order

Verify the model and finish required and ensure the circuit requirements match the device rating.

• Confirm finish (Almond) and SKU before ordering.
• Ensure the circuit voltage is 120 V or 277 V and that the connected load does not exceed 20 A.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Nova T Dimmer Switch 20 A, (NT-1PS-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.