Lutron Nova T Dimmer Switch 1000 W, Sienna (NT-1000-SI)

Product Overview

The Lutron NT-1000-SI is a Nova T single‑pole dimmer rated for 1000 W incandescent/halogen load at 120 V with a Sienna finish.

The control mounts in a standard single‑gang wall box and is offered as a Nova T series component.

Key Features

• 1000 W dimming capacity for incandescent/halogen loads at 120 V
• Single‑pole configuration
• Sienna finish
• Part of the Lutron Nova T series

What this dimmer does

The NT-1000-SI provides manual dimming control for lighting loads on a single‑pole circuit. It is part of Lutron’s Nova T family.

• Single‑pole operation: controls one switched hot leg.
• Intended for dimming incandescent and halogen loads at the rated wattage.

Electrical rating and load limits

Use the dimmer only within its rated electrical limits.

• Voltage: 120 V
• Incandescent/halogen load rating: 1000 W
• Match load wattage and type to the dimmer rating

Typical applications

Common uses include residential lighting projects and contractor installations where a 1000 W single‑pole dimmer is required.

• Residential circuits requiring high-wattage incandescent or halogen dimming
• Retrofits and new construction where Nova T series controls are specified

Compatibility and installation notes

Confirm the dimmer’s load type and wattage rating match the connected fixtures and that wiring corresponds to single‑pole control.

• Mounts in a standard single‑gang wall box
• Verify fixture compatibility before installation

Before You Order

Verify the dimmer’s single‑pole configuration, 120 V rating, and 1000 W capacity match your circuit and fixtures.

• Confirm fixture compatibility, particularly for non‑incandescent loads.
• Confirm the finish and that the device fits a standard single‑gang wall box.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Nova T Dimmer Switch 1000 W, Sienna (NT-1000-SI). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.