Lutron Nova T Dimmer Switch 250 W NTRP-250 Series 1

Product Overview

The Lutron NTRP-250 Nova T is a single‑pole wall dimmer rated for 250 W of dimmable LED/CFL and 600 W ELV at 120 V. A neutral conductor is required at the switch box.

Available as finish-specific SKUs (Sienna, Ivory, Almond, White, Light Almond, Gray).

Key Features

• 250 W rating for dimmable LED/CFL loads; 600 W rating for ELV loads at 120 V
• Neutral required
• Single‑pole configuration
• Sold in multiple finish SKUs

What this dimmer does

The Lutron NTRP-250 provides on/off switching and dimming control for compatible LED/CFL and ELV fixtures on a 120 V circuit. It is a single‑pole control intended to replace a standard single‑gang switch.

• Controls dimmable LED and CFL loads up to 250 W
• Controls electronic low‑voltage (ELV) loads up to 600 W
• Single‑pole operation

Electrical and load requirements

A neutral conductor is required at the switch box. Ensure the combined connected load does not exceed the dimmer’s LED or ELV ratings.

• Voltage: 120 V
• LED/CFL rating: 250 W
• ELV rating: 600 W
• Neutral: required

Available finishes and SKUs

This product is sold as separate SKUs for each finish. Select the SKU that matches your wallplate/trim color when ordering.

• NTRP-250-SI — Sienna
• NTRP-250-IV — Ivory
• NTRP-250-AL — Almond
• NTRP-250-WH — White
• NTRP-250-LA — Light Almond
• NTRP-250-GR — Gray

Before You Order

Verify the circuit provides a neutral conductor and that the total connected load does not exceed the dimmer’s LED or ELV ratings.

• Confirm a neutral is present at the switch box
• Match total connected LED/CFL load to 250 W maximum and ELV loads to 600 W maximum
• Select the finish-specific SKU for ordering

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Nova T Dimmer Switch 250 W NTRP-250 Series 1. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.