Lutron Nova 3-Wire Dimmer Switch 16 A, (NF-10-AL)

Product Overview

The Lutron NF-10-AL is a Nova series single‑pole dimmer switch rated for 16 A at 120 V with 3‑wire wiring for control of fluorescent ballasts and LED drivers. It mounts in a standard single‑gang wall box and is finished in Almond.

Genuine Lutron Nova component intended for system‑matched installations. Match the dimmer to the connected load type and aggregate wattage before use.

Key Features

• 3‑wire configuration for fluorescent ballast and LED‑driver loads
• 16 A rating at 120 V (single‑pole)
• Nova series component
• Almond finish

What this dimmer does

The NF-10-AL provides single‑pole dimming control using a 3‑wire connection tailored for control of fluorescent ballasts and LED drivers. It should be matched to compatible fixture drivers and total load wattage.

• Single‑pole operation
• Intended for 3‑wire ballast and LED‑driver loads

Electrical rating and wiring

Confirm electrical compatibility before installing: the NF-10-AL is rated 16 A at 120 V and uses a 3‑wire connection appropriate for ballast or LED‑driver control.

• Amperage: 16 A
• Voltage: 120 V
• Wiring: 3‑wire (for ballast / LED‑driver applications)
• Pole/configuration: Single‑pole

Typical applications

Common uses include dimming fluorescent ballast and LED‑driver loads and general residential or commercial single‑pole dimming where the device ratings and wiring match the installation.

• Dimming fluorescent ballast and LED‑driver loads
• Dimming compatible LED, halogen, or incandescent fixtures when matched to load type and wattage
• Retrofit and new construction single‑gang installations

Installation and compatibility notes

Match the dimmer to the connected fixture load type and total wattage. Verify wiring and load compatibility prior to installation.

• Confirm load type (ballast, LED driver, etc.) and aggregate wattage before installing
• Mounts in a standard single‑gang wall box
• For multi‑location dimming, use compatible companion controls (verify compatibility separately)

Finish and mounting

The NF-10-AL is finished in Almond and mounts in a standard single‑gang wall box suitable for retrofit or new construction.

• Finish: Almond
• Mounting: single‑gang wall box

Before You Order

Confirm the model NF-10-AL (Almond) and verify the dimmer’s 16 A, 120 V rating and 3‑wire ballast/LED‑driver configuration match the intended fixtures and circuit.

• Verify total connected wattage and load type before ordering or installation

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Nova 3-Wire Dimmer Switch 16 A, (NF-10-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.