Lutron Nova 3-Wire Dimmer Switch 8 A, Sienna (NF-10-277-SI)

Product Overview

The Lutron NF-10-277-SI is a Nova-series 3‑wire dimmer switch rated for 8 A at 277 V with single‑pole configuration. It mounts in a standard single‑gang wall box and is finished in Sienna.

Designed to control 3‑wire fluorescent ballasts and compatible LED drivers, this genuine Lutron component is intended for system‑matched installations and multi‑location dimming when used with companion controls.

Key Features

• Rated 8 A at 277 V (single‑pole)
• 3‑wire control for fluorescent ballast and LED‑driver loads
• Nova series — system‑matched Lutron component
• Single‑gang wall‑box mount
• Finish: Sienna (UPC 27557176408)

What this dimmer controls

The NF-10-277-SI is built to control 3‑wire fluorescent ballasts and compatible LED drivers. It also supports dimming of LED, halogen or incandescent lighting when those loads are wired appropriately to the 3‑wire control configuration.

• Primary load types: 3‑wire fluorescent ballast and LED‑driver loads
• Also usable with LED, halogen, and incandescent loads when matched to the device wiring and ratings

Electrical rating and configuration

Use this dimmer where a single‑pole control rated for 8 A at 277 V is required. The NF-10-277-SI uses a 3‑wire connection intended for ballast/driver control and is part of Lutron's Nova series.

• Amperage: 8 A
• Voltage: 277 V
• Configuration: Single‑pole
• Wiring: 3‑wire (ballast / LED‑driver)

Compatibility and installation notes

Match the dimmer to the load type and total connected wattage before installation. The NF-10-277-SI is intended for use in system‑matched Lutron installations and can be used in multi‑location dimming applications when paired with the appropriate companion controls.

• Confirm load type (ballast, LED driver, etc.) and aggregate wattage does not exceed device rating
• Intended for single‑gang wall‑box mounting
• Use companion controls for multi‑location dimming where required

Physical fit and finish

The control fits a standard single‑gang wall box and is finished in Sienna to match common decorative palettes. Refer to the product model number and UPC when specifying or ordering.

• Series: Nova
• Finish: Sienna
• UPC: 27557176408

Before You Order

Confirm the model number NF-10-277-SI and that an 8 A, 277 V single‑pole 3‑wire dimmer meets the connected load requirements before ordering.

• Verify total connected wattage and load type (fluorescent ballast, LED driver, etc.)
• Confirm finish (Sienna) for aesthetic match
• Confirm quantity and model number required for multi‑location installations

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Nova 3-Wire Dimmer Switch 8 A, Sienna (NF-10-277-SI). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.