Lutron Maestro Occupancy Sensor Switch 8 A, (MS-Z101-V-AL)

Product Overview

The Lutron MS-Z101-V-AL is a Maestro-series occupancy sensor switch that replaces a standard wall switch to provide automatic lighting control. This SKU is finished in Almond.

It is rated to switch up to 8 A of lighting load at 10 V, supports single-pole and multi-location configurations, and provides 0–10 V dimming capability. The device includes adjustable timeout and sensitivity settings.

Key Features

• Switches up to 8 A lighting load at 10 V
• Single-pole or multi-location operation
• 0–10 V dimming control
• Adjustable timeout and sensitivity
• Intended to replace a manual wall switch for automatic lighting control

What this switch does

The MS-Z101-V-AL replaces a standard wall switch to provide occupancy-based automatic lighting control. It turns lights on and off based on detected occupancy and includes adjustable sensitivity and time-out settings to tune detection for room conditions.

• Replaces a manual wall switch for automated control
• Adjustable sensitivity and timeout to tune performance

Electrical rating and control compatibility

This Maestro sensor is rated to switch up to 8 A of lighting load at 10 V and provides a 0–10 V dimming interface. It is suitable for single-pole installations and can be used in multi-location configurations where the product supports that wiring.

• Amperage: 8 A
• Voltage: 10 V
• Dimming interface: 0–10 V
• Pole/configuration: Single-pole / multi-location

Typical applications

Common uses for this type of occupancy sensor include spaces that benefit from automatic lighting control and compliance with energy-code requirements.

• Offices and conference rooms
• Restrooms and classrooms
• Storage rooms and similar indoor spaces

Installation and setup notes

Before installation, set the desired vacancy or occupancy mode and adjust the time-out and sensitivity settings to match room traffic. Follow local electrical codes and standard wiring practices for single-pole or multi-location installations.

• Set vacancy/occupancy mode and timeout prior to commissioning
• Adjust sensitivity to reduce nuisance switching

Finish and variant options

This SKU, MS-Z101-V-AL, is finished in Almond. The MS-Z101-V series is offered in multiple finishes; select the appropriate SKU for the finish you need.

• MS-Z101-V-AL — Almond
• Other finishes in the series: Black (MS-Z101-V-BL), Brown (MS-Z101-V-BR), Ivory (MS-Z101-V-IV), Light Almond (MS-Z101-V-LA), Taupe (MS-Z101-V-TP)

Before You Order

Confirm the correct model number and finish before ordering, and verify the 8 A, 10 V rating and 0–10 V dimming interface match your lighting load and control requirements.

• Select correct SKU for required finish
• Verify electrical ratings and dimming interface match your system

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Maestro Occupancy Sensor Switch 8 A, (MS-Z101-V-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.