Lutron Maestro Occupancy Sensor Switch 8 A, Hot (MS-Z101-HT)

Product Overview

The Lutron MS-Z101-HT is a Maestro occupancy sensor switch that replaces a standard wall switch to provide automatic lighting control. It is rated for 8 A switching and lists a 10 V dimming interface, supporting single-pole and multi-location configurations.

The device includes adjustable time-out and sensitivity settings so installers can tune operation to room traffic and energy-code lighting control needs.

Key Features

• Switches up to 8 A of lighting load at the wall box
• 10 V / 0–10V dimming interface
• Single-pole and multi-location operation
• Adjustable time-out and sensitivity
• Finish: Hot

What this switch does

The MS-Z101-HT replaces a standard wall switch to provide occupancy-based automatic lighting control. It switches lights on when presence is detected and turns them off after a configured time-out.

Electrical ratings and dimming

The unit is rated for 8 A switching and lists a 10 V dimming interface described as 0–10V in product information. Use these ratings to confirm compatibility with the lighting loads and control systems on site.

• Amperage: 8 A
• Voltage / dimming: 10 V / 0–10V (as listed)

Where to use it

Typical applications cited for this product include energy-code automatic lighting control in offices, restrooms, classrooms and storage rooms, or any location where replacing a manual wall switch with occupancy sensing is desired.

On-device adjustments

The sensor provides adjustable time-out and sensitivity settings so installers can tune detection to room traffic and reduce unwanted switching.

• Adjustable time-out
• Adjustable sensitivity

Compatibility and installation notes

The product supports single-pole and multi-location wiring configurations. Before installation, set the desired vacancy/occupancy mode and time-out according to the room’s needs.

• Configuration: Single-pole / multi-location
• Set vacancy/occupancy mode and time-out during installation

Before You Order

Verify the model and confirm the site wiring and dimming interface match the product’s listed 10 V / 0–10V requirements.

• Confirm required quantity and model
• Verify compatibility with the room’s wiring configuration and dimming control

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Maestro Occupancy Sensor Switch 8 A, Hot (MS-Z101-HT). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.