Lutron Maestro Vacancy Sensor Switch 2 A, (MS-VPS2H-LA)

Product Overview

The Lutron MS-VPS2H-LA is a Maestro-series vacancy sensor switch that replaces a standard wall switch to provide automatic lighting shutoff. It is rated for 2 A switching at 120 V and requires a ground or neutral at the wall box.

Vacancy-mode operation requires manual switch-on and provides automatic shutoff when the room is vacant. Time-out and sensitivity are adjustable to allow tuning for room traffic. This SKU is finished in Light Almond.

Key Features

• Vacancy mode: manual on, automatic off
• Rated 2 A at 120 V for single‑pole switching
• Requires ground or neutral at the wall box
• Adjustable time-out and sensitivity
• Replaces a standard wall switch to add automatic lighting control

Function and operation

The MS-VPS2H-LA operates in vacancy mode: occupants turn the lights on manually and the sensor automatically turns them off after a programmed time-out when the room is vacant. Time-out and detection sensitivity are adjustable to better match room traffic patterns.

Electrical and load requirements

This switch is rated to switch up to 2 A at 120 V and is configured for single‑pole applications. A ground or neutral connection is required at the wall box for installation.

• Rated switching: 2 A
• Voltage: 120 V
• Configuration: Single‑pole
• Ground or neutral required at the box

Recommended applications

Suitable where vacancy-mode control is desired to reduce unnecessary lighting run-time or to meet energy-code requirements. Common installations include offices, restrooms, classrooms and storage rooms.

Compatibility and installation notes

Confirm a ground or neutral is available at the switch location and follow the manufacturer's wiring diagram for single‑pole installations. Set the vacancy/occupancy mode and time-out/sensitivity during setup to suit the room.

• Replaces a standard wall switch—intended for standard single‑gang box installation when wired per instructions
• Installer should set mode and time-out based on room use

Finish and SKU

This page covers the MS-VPS2H-LA SKU finished in Light Almond. The same model is offered in White under SKU MS-VPS2H-WH.

• SKU: MS-VPS2H-LA — Finish: Light Almond
• Alternate SKU: MS-VPS2H-WH — Finish: White

Before You Order

Verify the required SKU and finish, confirm a ground or neutral is present at the switch box, and ensure the connected lighting load does not exceed 2 A at 120 V.

• Confirm model number (MS-VPS2H-LA) and finish (Light Almond).
• Ensure ground or neutral is present at the switch box.
• Verify connected lighting load does not exceed 2 A at 120 V.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Maestro Vacancy Sensor Switch 2 A, (MS-VPS2H-LA). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.