Lutron Maestro Occupancy Sensor Switch 2 A, Midnight (MS-OPS2-MN)

Product Overview

The Lutron MS-OPS2-MN is a Maestro occupancy sensor switch that replaces a standard single‑pole wall switch to provide automatic lighting control. It is rated for 2 A switching at 120 V and requires a ground or neutral at the wall box.

The device has adjustable timeout and sensitivity settings to tune operation for room traffic. This SKU is finished in Midnight and is commonly used in offices, restrooms, classrooms, and storage rooms.

Key Features

• 2 A switching capacity at 120 V
• Single‑pole configuration to replace a standard wall switch
• Requires ground or neutral at the switch box
• Adjustable timeout and sensitivity
• Midnight finish (MS-OPS2-MN)

What this switch does

The MS-OPS2-MN replaces a standard single‑pole wall switch with an occupancy sensor that automatically controls lighting based on detected occupancy. The unit includes adjustable sensitivity and a configurable timeout.

• Automatic on/off control based on occupancy detection
• Adjustable timeout and sensitivity settings

Electrical and load requirements

Install where the controlled lighting load does not exceed 2 A at 120 V. The device requires either a ground or a neutral present at the wall box; follow local electrical code during installation.

• Voltage: 120 V
• Switching capacity: 2 A
• Configuration: Single‑pole
• Wiring: Ground or neutral required at the box

Installation and configuration notes

The MS-OPS2-MN is intended to replace an existing single‑pole switch. Wiring and setup should follow the manufacturer's wiring diagram and local electrical code. Set vacancy/occupancy mode and timeout to suit the room during commissioning.

• Replace a standard single‑pole switch
• Confirm ground or neutral is available before installation
• Adjust timeout and sensitivity during setup

Suitable applications

Common applications include interior spaces where automatic lighting control is desired or required by code.

• Offices
• Restrooms
• Classrooms
• Storage rooms

Finish and model identity

This SKU is MS-OPS2-MN in the Midnight finish. Verify the model number when ordering to ensure the correct finish and electrical rating.

• Model / SKU: MS-OPS2-MN
• Finish: Midnight
• Brand: Lutron

Before You Order

Confirm that the wall box provides a ground or neutral and that the intended lighting load does not exceed 2 A at 120 V.

• Check for ground or neutral at the switch box
• Verify the lighting load is ≤ 2 A at 120 V

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Maestro Occupancy Sensor Switch 2 A, Midnight (MS-OPS2-MN). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.