Lutron Maestro Dimmer Switch 450 W, (MALV-600-AL)

Product Overview

The Lutron MALV-600-AL is a Maestro-series wall dimmer rated for 450 W resistive/general dimmable load and 600 VA magnetic low-voltage (MLV) load at 120 V. It mounts in a standard single‑gang box and does not require a neutral conductor.

This listing is for the Almond finish (SKU MALV-600-AL). Other finishes in the MALV-600 family are available — confirm the exact SKU/finish before ordering.

Key Features

• 450 W dimmable load (resistive/general dimmable load)
• 600 VA MLV rating at 120 V
• No neutral required — fits existing 2‑wire installations
• Single‑pole operation with multi‑location capability (requires compatible companion controls for multi‑location)
• Maestro series finish: Almond (MALV-600-AL)

What this dimmer does

The MALV-600-AL is a wall-mounted Maestro dimmer that provides manual dimming control for compatible lighting loads. It supports single‑pole switching and can be used in multi‑location dimming arrangements when paired with appropriate companion controls.

Load ratings and supported lamp types

Use this dimmer where the combined connected load does not exceed the device ratings and where the load type matches the dimmer’s control method.

• MLV (magnetic low‑voltage) rating: 600 VA at 120 V
• Resistive / general dimmable load: 450 W
• Match the dimmer’s load type and total wattage to the fixtures being controlled

Installation and wiring notes

The MALV-600-AL installs in a standard single‑gang wall box and does not require a neutral conductor, enabling retrofit into existing two‑wire installations. For multi‑location setups, use compatible companion controls.

• No neutral required — intended for two‑wire installations
• Single‑gang mounting
• Confirm minimum load requirements and wiring configuration before installation

Model and finish

This SKU is MALV-600-AL in Almond finish. Verify the exact model/finish code when ordering.

• Exact SKU: MALV-600-AL — Finish: Almond
• Other MALV-600 SKUs include MALV-600-BL, MALV-600-BR, MALV-600-GR, MALV-600-IV, MALV-600-LA, MALV-600-WH

Before You Order

Confirm the model number and finish (MALV-600-AL) and ensure the total connected load and lamp type match the dimmer’s ratings.

• Confirm load type and total wattage before purchasing
• Verify existing wiring: this unit does not require a neutral and is intended for two‑wire installations
• Specify the exact SKU/finish to match existing devices and trim

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Maestro Dimmer Switch 450 W, (MALV-600-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.