Lutron Maestro Vacancy Sensor Switch 5 A MS-VPS5MH

Product Overview

The Lutron MS-VPS5MH is a Maestro-series vacancy sensor switch rated for 5 A switching at 120 V. It replaces a standard wall switch to provide vacancy-mode automatic shutoff while requiring manual on.

The device supports multi-location operation and requires a ground or neutral at the switch box. Finish options vary by SKU: White, Ivory, Almond, and Light Almond.

Key Features

• Vacancy mode: manual on, automatic off when no motion is detected
• 5 A switching capacity at 120 V
• Multi-location capable
• Requires ground or neutral at the switch box
• Adjustable timeout and sensitivity
• Available in multiple finishes: White, Ivory, Almond, Light Almond

How the MS-VPS5MH works

The MS-VPS5MH operates in vacancy mode: occupants turn lights on manually, and the sensor turns lights off after the selected timeout when no motion is detected. Sensitivity and timeout settings are adjustable to tune the device to room activity.

• Vacancy-mode behavior: manual on, automatic off
• Adjustable sensitivity and timeout settings

Electrical and load requirements

This switch is rated for switching up to 5 A at 120 V. A ground or neutral connection must be present in the wall box for proper installation.

• Voltage: 120 V
• Maximum switching: 5 A
• Wiring: ground or neutral required

Recommended applications

The MS-VPS5MH is suitable for replacing a standard wall switch where vacancy-mode automatic shutoff is desired. Typical locations include offices, restrooms, classrooms, and storage rooms.

• Replacement for manual wall switches to add vacancy-mode control
• Common for small to medium rooms

Compatibility and installation notes

Confirm the wall box provides a ground or neutral connection and follow the manufacturer wiring diagram for multi-location setups. Set vacancy/occupancy mode and timeout during installation according to the room's needs.

• Multi-location capable — follow wiring diagram for multi-location installations
• Configure mode and timeout during installation

Finish options

Select the SKU that matches the required finish for the project.

• White — MS-VPS5MH-WH
• Ivory — MS-VPS5MH-IV
• Almond — MS-VPS5MH-AL
• Light Almond — MS-VPS5MH-LA

Before You Order

Confirm the finish SKU and that the wall box has a ground or neutral connection.

• Choose the correct finish SKU: MS-VPS5MH-WH, MS-VPS5MH-IV, MS-VPS5MH-AL, MS-VPS5MH-LA
• Verify the switch rating (5 A at 120 V) matches the lighting circuit load

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Maestro Vacancy Sensor Switch 5 A MS-VPS5MH. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.