Lutron Maestro LED+ Dimmer Switch 1.5 A, Hot (MACL-LFQ-HT)

Product Overview

The Lutron MACL-LFQ-HT is a Maestro LED+ single‑pole dimmer rated 1.5 A for 120 V circuits and specified to control up to 75 W of dimmable LED/CFL. It installs in a standard single‑gang wall box and does not require a neutral conductor.

Offered in the Hot finish, the control provides four fan speeds for fan-control applications and supports dimmable LED, halogen, and incandescent fixtures when matched to the dimmer's load limits.

Key Features

• Rated 1.5 A at 120 V
• Controls up to 75 W of dimmable LED/CFL
• No neutral required — fits existing 2‑wire installations
• Single‑pole configuration
• Four fan speeds
• Maestro series

Function and intended use

The MACL-LFQ-HT is a wall-mounted Maestro LED+ dimmer intended to provide on/off and dimming control for a single lighting circuit. It is a single‑pole device for one-location control.

• Primary control: dimmable LED, CFL, halogen, and incandescent lighting when within the dimmer's load ratings
• Also provides four fan speeds for fan-control applications

Electrical ratings and load

Use on 120 V circuits within the specified current and wattage limits. Confirm the combined load does not exceed the dimmer's ratings before installation.

• Voltage: 120 V
• Current rating: 1.5 A
• LED/CFL load rating: up to 75 W

Installation and configuration

The MACL-LFQ-HT mounts in a standard single‑gang wall box and does not require a neutral conductor, enabling retrofit into existing 2‑wire installations. Follow local electrical codes and installation instructions from the manufacturer.

• Mounts in single‑gang box
• No neutral required
• Intended for single‑pole wiring

Compatibility and applications

Suitable for residential lighting circuits and common retrofit or new‑construction installations where a single‑pole dimmer or fan control is needed. Use only with fixtures and lamps that meet the dimmer's load requirements.

• Applications: residential dimming, lighting-control retrofits, new construction
• For multi-location dimming, use companion controls specifically designed for the system

Before You Order

Verify the total connected load does not exceed the dimmer's ratings and that the fixtures are dimmable.

• Match dimmer load type and wattage to fixtures
• Confirm single‑pole application

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Maestro LED+ Dimmer Switch 1.5 A, Hot (MACL-LFQ-HT). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.