Lutron Diva Dimmer Switch 8 A, Midnight (DVSCSTV-MN)

Product Overview

The Lutron DVSCSTV-MN is a Diva series dimmer switch rated for 8 A at 10 V. It supports single‑pole or 3‑way wiring and mounts in a standard single‑gang wall box.

This model does not require a neutral and is finished in Midnight. Confirm fixture compatibility with 0–10 V dimming and any minimum wattage requirements for no‑neutral operation before installation.

Key Features

• 8 A rating at 10 V
• No neutral required — installs in existing 2‑wire boxes
• Single‑pole or 3‑way operation
• Diva series, Midnight finish

What this dimmer does

The DVSCSTV-MN provides variable control of a compatible lighting circuit using 0–10 V dimming and is rated for loads up to 8 amps at 10 volts. It supports single‑location control or multi‑location dimming when wired in a 3‑way configuration with compatible companion controls.

• Dimming type: 0–10 V
• Sized for lighting loads up to 8 A at 10 V

Compatibility and load requirements

Confirm compatibility between the dimmer and the connected fixtures before installation. Match the dimmer's load type and wattage to the lighting being controlled. Because this model requires no neutral, verify the load meets any minimum wattage required for no‑neutral operation.

• No neutral required — installs in existing 2‑wire boxes
• Verify fixtures support 0–10 V dimming and meet any minimum wattage for no‑neutral operation

Wiring and mounting

The DVSCSTV-MN fits a standard single‑gang wall box and supports single‑pole (one location) or 3‑way (two location) wiring. Use compatible companion controls for multi‑location dimming setups.

• Mounts in a single‑gang wall box
• Supports single‑pole or 3‑way wiring

Finish and typical uses

This SKU is finished in Midnight. Typical uses include residential lighting circuits and contractor lighting‑control installations such as retrofits and new construction where 0–10 V dimming is appropriate.

• Finish: Midnight
• Typical applications: residential lighting circuits, retrofits, new construction

Before You Order

Verify fixture compatibility with 0–10 V dimming and confirm the connected load meets any minimum wattage requirements for no‑neutral operation.

• Confirm fixtures support 0–10 V dimming
• Match total load to the dimmer's 8 A rating
• If planning multi‑location dimming, confirm use of compatible companion controls

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Diva Dimmer Switch 8 A, Midnight (DVSCSTV-MN). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.