Lutron Diva 3-Wire Dimmer Switch 8 A, Biscuit (DVSCF-103P-BI)

Product Overview

The Lutron DVSCF-103P-BI is a Diva-series 3‑wire dimmer switch rated for 8 A (1000 W at 120 V) with a required neutral. It supports single‑pole or 3‑way wiring and mounts in a standard single‑gang wall box.

It is intended for dimming fluorescent ballast and LED-driver loads as well as LED, halogen and incandescent fixtures when the combined load matches the dimmer rating. Finish: Biscuit.

Key Features

• 8 A rating (1000 W at 120 V)
• 3‑wire design with a required neutral connection
• Single‑pole or 3‑way operation
• Fits a standard single‑gang wall box; Biscuit finish

What this dimmer controls

The DVSCF-103P-BI is specified to control fluorescent ballasts, LED-driver loads, and conventional LED, halogen or incandescent fixtures. Match the combined wattage of connected fixtures to the dimmer's 1000 W (120 V) rating.

• Compatible load types: fluorescent ballast loads, LED-driver loads, LED, halogen, incandescent (verify compatibility with fixture drivers/ballasts)
• Maximum load: 1000 W at 120 V (8 A)

Electrical and wiring requirements

This model requires a neutral conductor at the switch box and uses a 3‑wire connection. It supports single‑pole installations or 3‑way configurations for dimming from two locations when wired appropriately.

• Voltage: 120 V
• Amperage: 8 A
• Wiring: 3‑wire; neutral required
• Configuration: Single‑pole or 3‑way

Typical applications

Common uses include lighting-control retrofits and new-construction installations where a neutral is present, and residential circuits requiring dimming of compatible LED, fluorescent, halogen or incandescent fixtures.

• Lighting-control retrofits and new construction (neutral required)
• Residential dimming of compatible LED, halogen or incandescent fixtures
• Dimming fluorescent ballast and LED‑driver loads

Mounting and finish

The DVSCF-103P-BI installs in a standard single‑gang wall box and is finished in Biscuit. Confirm model number and finish when specifying multiple locations.

• Mounts in single‑gang wall box
• Finish: Biscuit
• Model / SKU: DVSCF-103P-BI

Before You Order

Verify a neutral conductor is present in the switch box and that the combined connected load does not exceed 1000 W (120 V).

• Confirm the DVSCF-103P-BI SKU and Biscuit finish match your project requirements.
• Ensure total connected load ≤ 1000 W at 120 V.
• Confirm a neutral conductor is available in the switch box.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Diva 3-Wire Dimmer Switch 8 A, Biscuit (DVSCF-103P-BI). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.