Lutron Diva Dimmer Switch 300 W, Midnight (DVSCELV-303P-MN)

Product Overview

The Lutron DVSCELV-303P-MN is a Diva-series wall dimmer rated for 300 W at 120 V. It requires a neutral conductor at the switch box and supports single‑pole or 3‑way wiring.

This ELV (electronic low‑voltage) capable dimmer is offered in the Midnight finish and is intended for residential lighting dimming, retrofits, and new construction projects.

Key Features

• 300 W dimmable load at 120 V
• Neutral required for installation (neutral connection supports low‑end, flicker‑free dimming)
• Single‑pole or 3‑way operation for multi‑location control
• ELV dimming compatible with dimmable LED, halogen, and incandescent fixtures
• Midnight finish (model DVSCELV-303P-MN)

What this dimmer does

The DVSCELV-303P-MN is a wall-mounted dimmer designed to control lighting circuits up to 300 W at 120 V. It provides variable light control using electronic low‑voltage (ELV) dimming technology and is intended for residential dimming applications including retrofits and new construction.

• Variable dimming for LED, halogen, and incandescent lamps (see compatibility section).
• Single‑gang installation in a standard wall box.

Electrical and load requirements

Use this dimmer on 120 V circuits and do not exceed the 300 W load rating. A neutral conductor is required at the switch location for proper operation and improved low‑end dimming performance.

• Rated load: 300 W at 120 V
• Neutral: required

Light source compatibility

The DVSCELV-303P-MN is specified for ELV dimming and is suitable for dimmable LED, halogen, and incandescent fixtures when those fixtures are within the dimmer's load rating and are compatible with ELV controls.

• Match the dimmer to the fixture's dimmable driver or lamp type and aggregate wattage.
• Confirm fixture compatibility with ELV dimming for best performance.

Switch configuration and wiring

This model supports single‑pole installation (control from one location) or 3‑way installation (control from two locations). Use compatible companion controls for 3‑way/multi‑location setups as required by the system design.

• Configuration: Single‑Pole / 3‑Way
• For multi‑location dimming, follow standard 3‑way wiring practices and use approved companion devices.

Finish and physical installation

The DVSCELV-303P-MN is finished in Midnight and mounts in a standard single‑gang wall box. It is a genuine Lutron Diva series component intended for system‑matched installations.

• Finish: Midnight
• Mounts in a standard single‑gang box

Before You Order

Confirm the model number and required quantity before ordering. Verify that the circuit voltage, total connected wattage, and fixture dimming compatibility match this dimmer's specifications. A neutral conductor must be present at the switch box.

• Confirm 120 V circuit and aggregate load ≤ 300 W.
• Ensure fixtures/drivers are compatible with ELV dimming.
• Verify neutral conductor at the switch box before installation.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Diva Dimmer Switch 300 W, Midnight (DVSCELV-303P-MN). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.