Lutron Diva Dimmer Switch 1000 W, (DVSC-10P-SW)

Product Overview

The Lutron DVSC-10P-SW is a single-pole Diva series dimmer switch rated for 1000 W incandescent/halogen at 120 V. It fits a standard single-gang wall box and is finished in Snow White.

This model is offered in two finish SKUs (Snow White and Taupe) and is intended for installations that require up to a 1000 W incandescent/halogen load capacity.

Key Features

• Rated for 1000 W incandescent/halogen load at 120 V
• Single-pole configuration
• Fits a standard single-gang wall box
• Available finishes: Snow White (DVSC-10P-SW) and Taupe (DVSC-10P-TP)

What this dimmer does

The DVSC-10P-SW provides manual dimming control for a single lighting circuit. It is specified for incandescent and halogen loads up to 1000 watts at 120 volts and operates as a single-pole switch (controls lighting from one location).

• Manual dimming for one lighting load
• Single-pole operation

Typical applications

Common uses include residential rooms and lighting-control retrofits or new construction where a high incandescent/halogen load capacity is required.

• Replacing a standard switch with a dimmer for incandescent or halogen fixtures
• Retrofit or new-construction installations requiring a Diva-series dimmer

Electrical and load details

Confirm the connected fixtures' type and total wattage before installation. The DVSC-10P-SW is specified for 1000 W incandescent/halogen at 120 V and is configured as a single-pole control.

• Voltage: 120 V
• Rated incandescent/halogen load: 1000 W
• Pole/configuration: Single-Pole

Compatibility and installation notes

Match the dimmer to the load type and total wattage of the connected fixtures prior to installation. For multi-location dimming, compatible companion controls designed for the Diva family are used; select those companion SKUs separately. The DVSC-10P-SW mounts in a standard single-gang wall box.

• Verify fixture type and aggregated wattage do not exceed the dimmer rating
• Use appropriate companion controls if multi-location dimming is required
• Mounts in a standard single-gang wall box

Finish and physical fit

This SKU (DVSC-10P-SW) is finished in Snow White and is designed to fit standard single-gang wall plates. An alternate finish is available under SKU DVSC-10P-TP (Taupe).

• Finish: Snow White (DVSC-10P-SW)
• Alternate finish SKU: DVSC-10P-TP (Taupe)

Before You Order

Verify the model and confirm the connected fixtures' total wattage does not exceed the 1000 W rating.

• Confirm required SKU and quantity
• Ensure total connected incandescent/halogen wattage is within the dimmer rating

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Diva Dimmer Switch 1000 W, (DVSC-10P-SW). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.