Lutron Diva Dimmer Switch 1000 W, (DV-10PH-AL)

Product Overview

The Lutron DV-10PH-AL is a single‑pole wall dimmer in an almond finish rated for 1000 W incandescent/halogen at 120 V. It mounts in a standard single‑gang electrical box.

Part of the Lutron Diva series, this SKU is intended for use where a high‑capacity incandescent/halogen dimmer is required.

Key Features

• 1000 W rated load for incandescent/halogen at 120 V
• Single‑pole configuration for one‑location control
• Diva series styling in Almond finish
• Designed to mount in a standard single‑gang wall box

What this dimmer does

The DV-10PH-AL provides manual dimming control for a single lighting circuit. It is specified for use with incandescent and halogen loads up to its rated capacity.

• Single‑pole manual dimmer for one‑location control
• Intended for direct control of incandescent and halogen fixtures

Typical applications

Common uses include residential rooms and other locations where incandescent or halogen fixtures require dimming. Suitable for retrofit projects and new construction when a single‑location, high‑capacity dimmer is needed.

• Residential lighting circuits
• Lighting-control retrofits
• New construction single‑location dimming

Electrical and load requirements

Verify the circuit and connected fixtures match the DV-10PH-AL electrical ratings before installation.

• Voltage: 120 V
• Rated load: 1000 W for incandescent/halogen
• Configuration: Single‑pole (one location)

Mounting and installation notes

The control is designed to install into a standard single‑gang wall box. Follow local electrical code and standard wiring practices during installation.

• Mounts in a single‑gang wall box
• Confirm matching load type and total wattage of connected fixtures prior to installation

Compatibility guidance

This SKU is specified for incandescent and halogen loads. If you plan to control other lamp types, verify compatibility with those specific lamps and drivers.

• Specified for incandescent and halogen lighting
• For multi‑location dimming, use compatible companion controls (confirm companion model separately)

Before You Order

Match the dimmer's load rating and lamp type to the fixtures on the circuit before ordering.

• Confirm this SKU (DV-10PH-AL) if Almond finish is required
• Verify total connected wattage does not exceed 1000 W

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Diva Dimmer Switch 1000 W, (DV-10PH-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.