Lutron Diva 3-Wire Dimmer Switch 6 A DVSCF-103P-277 Series 2

Product Overview

The Lutron DVSCF‑103P‑277 is a Diva‑series 3‑wire dimmer rated 6 A (1000 W at 277 V) for single‑pole or 3‑way applications. A neutral connection is required.

It is intended for control of compatible 3‑wire fluorescent ballasts and LED‑driver loads and mounts in a standard single‑gang wall box. Multiple finish variants are available as separate SKUs.

Key Features

• Rated 6 A / 1000 W at 277 V
• 3‑wire wiring for compatible fluorescent ballasts and LED drivers
• Neutral required
• Single‑pole or 3‑way operation
• Available in six finish SKUs: Taupe, Snow White, Pumice, Mist, Lunar Gray, Deep Sea

What this dimmer does

Direct answer: The DVSCF‑103P‑277 provides user control and dimming of compatible 3‑wire fluorescent ballasts and LED‑driver loads in single‑pole or 3‑way circuits.

It replaces a standard wall switch to add adjustable lighting control and can be used with companion controls for multi‑location dimming where supported.

• Controls compatible 3‑wire fluorescent ballast and LED‑driver loads
• Supports single‑pole or 3‑way (multi‑location) configurations

Electrical rating and wiring

Direct answer: The dimmer is rated 6 A and 1000 W at 277 V and requires a neutral conductor at the switch box.

Use the device only within its published voltage and wattage ratings and follow local electrical codes during installation.

• Voltage: 277 V
• Current: 6 A
• Load capacity: 1000 W (at 277 V)
• Wiring: 3‑wire (neutral required)

Typical applications

Direct answer: The DVSCF‑103P‑277 is used where dimming of compatible ballast or LED‑driver loads on 277 V circuits is required.

Typical uses include retrofit and new construction lighting control in commercial or multifamily settings where a neutral is present.

• Dimming compatible fluorescent ballast and LED‑driver loads on 277 V circuits
• Suitable for retrofit and new construction lighting control

Finish options and SKU mapping

Direct answer: Each finish is a separate SKU; choose the SKU that matches the finish you need.

Verify the SKU when ordering to ensure the selected finish is correct.

• DVSCF-103P-277TP — Taupe
• DVSCF-103P-277SW — Snow White
• DVSCF-103P-277PM — Pumice
• DVSCF-103P-277MI — Mist
• DVSCF-103P-277LG — Lunar Gray
• DVSCF-103P-277DE — Deep Sea

Installation and compatibility notes

Direct answer: A neutral conductor is required at the switch location; confirm the load type and total wattage of connected fixtures before installation.

Ensure compatibility between the dimmer and the specific ballasts or LED drivers being controlled and follow applicable electrical codes.

• Neutral conductor must be present in the box
• Match dimmer load type and total wattage to connected fixtures
• Use companion controls as required for 3‑way/multi‑location setups

Before You Order

Confirm the model number, required finish SKU, and that a neutral conductor is present in the switch box before ordering.

• Verify total connected wattage does not exceed 1000 W at 277 V
• Choose the correct SKU for finish: DVSCF‑103P‑277TP, ‑SW, ‑PM, ‑MI, ‑LG, or ‑DE

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Diva 3-Wire Dimmer Switch 6 A DVSCF-103P-277 Series 2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.