Lutron Skylark 3-Speed Fan Control 1.5 A, (CTFSQ-F-AL)

Product Overview

The Lutron CTFSQ-F-AL is a Skylark 3-speed wall-mounted fan control rated for 1.5 A of ceiling-fan load at 120 V. It provides three discrete speed positions and installs without a neutral, fitting standard 2‑wire fan boxes.

Supports single-pole or 3-way wiring and uses a captive linear slide that returns the fan to the last set speed. Finish: Almond.

Key Features

• Three discrete fan speeds for wall-mounted speed selection
• Rated 1.5 A at 120 V for ceiling-fan loads
• No neutral required — fits existing 2‑wire fan boxes
• Single-pole or 3‑way operation
• Captive linear slide returns to last set speed
• Finish: Almond (CTFSQ-F-AL)

What this control does

The CTFSQ-F-AL sets ceiling-fan speed from a wall location using three discrete speed positions and eliminates the need for a fan pull chain. The captive linear slide returns the fan to the last selected speed.

• Three discrete speeds for simple selection
• Captive linear slide stores last set speed

Electrical rating and wiring

Rated for 1.5 A at 120 V for ceiling-fan loads. The control does not require a neutral and is intended for installations where only two conductors are available. It supports single-pole wiring and can be wired for 3-way operation.

• Rating: 1.5 A at 120 V (ceiling-fan load)
• No neutral required — designed for 2‑wire installations
• Single-pole / 3‑way capable

Compatibility and installation notes

Before installation, verify the fan motor is compatible with electronic speed controls and confirm the connected load meets any minimum requirements for no-neutral operation. Follow proper wiring practices for single-pole or 3-way configurations.

• Verify fan motor compatibility with electronic speed controls
• Confirm any minimum load requirements for no-neutral operation
• Intended for retrofit or new-construction fan control use

Model and finish

This listing describes the Lutron Skylark CTFSQ-F-AL SKU in Almond finish. The Skylark fan-control family is available in other finishes under different SKUs.

• SKU: CTFSQ-F-AL
• Finish: Almond
• Series: Skylark

Before You Order

Confirm the model number and finish (CTFSQ-F-AL = Almond) and verify the fan motor compatibility and load requirements before ordering.

• Confirm the fan motor accepts electronic speed control.
• Confirm the connected load meets any minimum requirements for no-neutral operation.
• If you need control from two locations, plan for 3-way wiring.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Skylark 3-Speed Fan Control 1.5 A, (CTFSQ-F-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.