Lutron Ariadni LED+ Dimmer Switch 150 W, (AYCL-153P-AL)

Product Overview

The Lutron AYCL-153P-AL is an Ariadni LED+ wall dimmer rated for 150 W of dimmable LED/CFL load at 120 V. It installs in a standard single‑gang box and supports single‑pole or 3‑way wiring.

This SKU is finished in Almond and does not require a neutral conductor for operation.

Key Features

• 150 W maximum LED/CFL load at 120 V
• No neutral required — fits existing 2‑wire boxes
• Single‑pole or 3‑way operation for multi‑location dimming
• Available in Almond finish (AYCL-153P-AL)

Function and intended use

This Ariadni LED+ dimmer provides variable light control for fixtures on standard 120 V residential circuits. It mounts in a single‑gang wall box and is intended for controlling dimmable LED, CFL, halogen, or incandescent lamps within its rated load.

• Controls lighting level for one circuit from the installed location
• Can be used with dimmable LED and CFL lamps within the rated load

Electrical and load requirements

The dimmer is rated for 150 W of LED/CFL load at 120 V and does not require a neutral conductor.

• Rated LED/CFL load: 150 W
• Voltage: 120 V
• Neutral: not required — installs in standard 2‑wire boxes
• Verify connected fixtures and total load do not exceed 150 W

Pole configuration and multi‑location control

This SKU supports single‑pole installations and can be wired for 3‑way use to allow dimming from two locations when wired appropriately.

• Single‑pole or 3‑way wiring options
• When using in a 3‑way circuit, use the correct companion/3‑way wiring per installation requirements

Finish, SKUs, and family

This product page covers the AYCL-153P-AL in Almond finish. The AYCL-153P model family is offered under multiple SKUs for different finishes; confirm the exact SKU when ordering.

• This SKU: AYCL-153P-AL — Almond finish
• Other SKUs in the AYCL-153P family include finishes such as Black, Brown, Ivory, Light Almond, and White

Installation and selection notes

Verify load compatibility and wiring before ordering and installation. Because the dimmer is designed to operate without a neutral, confirm any minimum wattage requirements from product documentation if using low‑wattage LED fixtures.

• Confirm the model number and finish before ordering
• Match the dimmer load type and total wattage to the fixtures being controlled
• Follow local electrical codes and use a qualified electrician for installation

Before You Order

Confirm the SKU, finish, and that the combined connected load does not exceed 150 W.

• Confirm AYCL-153P-AL is the desired Almond finish SKU.
• Verify the total load and fixture type are compatible with a 150 W no‑neutral dimmer.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Ariadni LED+ Dimmer Switch 150 W, (AYCL-153P-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.