Lutron LED Ballast Retrofit Kit T5HO 4000K (3LD4T5H-1M40-1)

Product Overview

The Lutron 3LD4T5H-1M40-1 is a ballast and LED-driver retrofit kit for a 4 ft, single-lamp T5HO fluorescent fixture. It converts an existing fluorescent fixture to dimmable LED while reusing the fixture housing and lamp sockets.

The kit provides 4000K color temperature and uses 3-wire wiring. Its stated dimming range is down to 1% with a compatible Lutron control.

Key Features

• For 4 ft, 1-lamp T5HO fluorescent fixtures
• Converts an existing fluorescent fixture to dimmable LED
• 4000K color temperature
• Dims to 1% with a compatible Lutron control
• 3-wire driver pairs with 3-wire Lutron dimmers
• Reuses the existing fixture housing and lamp sockets

T5HO fluorescent fixture retrofit

The 3LD4T5H-1M40-1 is designed for retrofitting an existing 4 ft, 1-lamp T5HO fluorescent fixture to dimmable LED. The retrofit reuses the fixture housing and lamp sockets.

• Lamp type: T5HO
• Lamp length: 4 ft
• Lamp count: 1
• Color temperature: 4000K

Dimming and 3-wire control compatibility

This kit dims to 1% when used with a compatible Lutron control. The 3-wire driver is specified to pair with 3-wire Lutron dimmers.

Confirm the existing lamp configuration

Before installation, match the retrofit kit to the existing fixture's lamp type, length, and lamp count. The specified configuration for this model is T5HO, 4 ft, and one lamp.

Before You Order

Confirm that the existing fixture uses a 4 ft, single-lamp T5HO configuration before selecting this retrofit kit.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron LED Ballast Retrofit Kit T5HO 4000K (3LD4T5H-1M40-1). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.