Lutron LED Ballast Retrofit Kit T5H 5000K (3LD4T5-3M50-1)

Product Overview

The Lutron 3LD4T5-3M50-1 is a three-wire LED ballast retrofit kit for converting an existing fluorescent fixture to dimmable LED. It is rated for T5H lamps in a 4 ft, three-lamp configuration and provides 5000K light.

The kit reuses the existing fixture housing and lamp sockets. Its three-wire driver pairs with three-wire Lutron dimmers, and it dims to 1% when used with a compatible Lutron control.

Key Features

• Retrofits an existing fluorescent fixture to dimmable LED.
• Designed for T5H, 4 ft, three-lamp fixtures.
• 5000K color temperature.
• Dimming to 1% with a compatible Lutron control.
• Reuses the existing fixture housing and lamp sockets.

Fluorescent fixture retrofit

The 3LD4T5-3M50-1 converts an existing fluorescent fixture to dimmable LED. The retrofit reuses the fixture housing and lamp sockets; match the kit to the existing lamp type, length, and lamp count.

Dimming and control compatibility

The kit dims to 1% with a compatible Lutron control. Its three-wire driver pairs with three-wire Lutron dimmers.

Where this retrofit kit may be used

The product is identified for fluorescent-to-LED retrofit projects in settings such as offices, schools, retail spaces, and warehouses. It may also be considered for energy- and maintenance-reduction projects.

Before You Order

Confirm that the existing fluorescent fixture uses T5H lamps in a 4 ft, three-lamp configuration. For dimming, verify the planned control is a compatible Lutron control and matches the kit’s three-wire driver.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron LED Ballast Retrofit Kit T5H 5000K (3LD4T5-3M50-1). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.