Lutron LED Ballast Retrofit Kit T5H 4000K (3LD3T5H-1M40-1)

Product Overview

The Lutron 3LD3T5H-1M40-1 is an LED ballast retrofit kit for 3 ft T5H, single-lamp fluorescent fixtures. It is intended to retrofit existing fluorescent housings by replacing the ballast/driver while reusing the fixture housing and lamp sockets.

The kit provides a 4000K color temperature and includes a 3-wire driver that pairs with 3-wire Lutron dimmers; when used with compatible Lutron controls, the driver supports dimming down to 1%.

Key Features

• For T5H, 3 ft, single-lamp fixtures
• 4000K color temperature
• 3-wire LED driver compatible with 3-wire Lutron dimmers
• Dimmable to 1% with compatible Lutron controls
• Reuses existing fixture housing and lamp sockets
• UPC: 784276316354

What this kit does

This retrofit kit replaces the ballast/driver in a 3 ft T5H, single-lamp fluorescent fixture to provide LED operation while reusing the existing housing and lamp sockets.

• Converts a compatible fluorescent fixture to LED operation
• Provides 4000K correlated color temperature

Typical applications

Intended for fluorescent-to-LED retrofit projects where retaining the existing fixture housing and sockets is desired. Suitable for commercial and institutional installations that use compatible T5H, 3 ft, single-lamp fixtures.

• Offices
• Schools
• Retail spaces
• Warehouses
• Fluorescent-to-LED retrofit projects

Dimming and control compatibility

The kit includes a 3-wire driver designed to pair with 3-wire Lutron dimmers. When paired with a compatible Lutron control, the driver supports dimming to 1% as specified by the product information.

• 3-wire driver pairs with 3-wire Lutron dimmers
• Dimming: to 1% with compatible Lutron controls

Installation and compatibility notes

Match the kit to the fixture's lamp type, length, and lamp count before ordering and installation. The kit is for a single 3 ft T5H lamp configuration and is intended to replace the ballast/driver while reusing existing sockets and housing.

• Confirm the existing fixture is a 3 ft T5H, 1-lamp configuration before ordering
• The kit replaces the ballast/driver and reuses existing lamp sockets and housing

Before You Order

Confirm the existing fixture's lamp type, length and lamp count match this kit (T5H, 3 ft, single lamp) before ordering.

• Verify the existing fixture is a 3 ft T5H, 1-lamp configuration
• If 1% dimming is required, plan to pair the kit with a compatible 3-wire Lutron dimmer

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron LED Ballast Retrofit Kit T5H 4000K (3LD3T5H-1M40-1). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.