Lutron LED Ballast Retrofit Kit T5H 3000K (3LD3T5H-1M30-1)

Product Overview

The Lutron 3LD3T5H-1M30-1 is an LED ballast retrofit kit for a single 3 ft T5H lamp. It is intended to replace a fluorescent ballast with an LED driver and is specified at a 3000K color temperature.

The kit uses a 3-wire driver intended to pair with compatible 3-wire Lutron dimmers and is designed to reuse the existing fixture housing and lamp sockets.

Key Features

• Retrofits existing T5H fluorescent fixtures to LED while reusing housing and lamp sockets
• 3000K color temperature
• Dimmable to 1% when used with a compatible Lutron control
• 3-wire driver for use with compatible 3-wire Lutron dimmers
• For single-lamp, 3 ft T5H fixtures

What this kit does

The 3LD3T5H-1M30-1 replaces the fluorescent ballast in a 3 ft, single-lamp T5H fixture with an LED driver, enabling dimmable LED operation while reusing the existing housing and lamp sockets.

• Single-lamp (1) configuration for 3 ft T5H fixtures
• Specified color temperature: 3000K
• Dimmable to 1% when used with a compatible Lutron control

Suitable applications

Use this retrofit kit where 3 ft T5H fixtures are already installed and the project requires conversion to LED with dimming capability.

• Fluorescent-to-LED retrofit projects
• Commercial and institutional settings with existing T5H fixtures

Compatibility and controls

The kit includes a 3-wire driver designed to pair with compatible 3-wire Lutron dimmers. Achieving the 1% dimming range depends on using a compatible Lutron control.

• 3-wire LED driver — intended to work with compatible 3-wire Lutron dimmers
• Dimming to 1% is achieved only with compatible Lutron controls

Key specifications

Confirm these specifications against the fixture you plan to retrofit.

• Brand: Lutron
• Model / SKU: 3LD3T5H-1M30-1
• Product Type: Ballast & LED Driver (Retrofit Kit)
• Lamp type: T5H
• Lamp length: 3 ft
• Lamp count: 1
• Color temperature: 3000K
• Wiring: 3-wire (ballast / LED driver)
• Dimming range: 1% (with compatible Lutron control)
• UPC: 784276316316

Installation considerations

Verify the kit matches the existing lamp type, length and lamp count before ordering. Follow local electrical codes and the manufacturer's wiring instructions during installation.

• Match kit to existing fixture (T5H, 3 ft, single-lamp)
• Confirm installed dimmer is a compatible 3-wire Lutron dimmer to achieve the stated dimming range
• Follow applicable electrical codes during ballast/driver replacement

Before You Order

Confirm the fixture uses a 3 ft T5H single lamp and verify dimmer compatibility if 1% dimming is required.

• Verify fixture uses a 3 ft T5H single lamp
• Confirm installed dimmer is a compatible 3-wire Lutron dimmer for 1% dimming performance

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron LED Ballast Retrofit Kit T5H 3000K (3LD3T5H-1M30-1). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.