Lutron LED Ballast Retrofit Kit T5 5000K (3LD2T5-1M50-24)

Product Overview

The Lutron 3LD2T5-1M50-24 is an LED ballast retrofit kit for single 2 ft T5 fluorescent fixtures. It provides a 5000K color temperature and includes a 3-wire LED driver intended to pair with compatible Lutron dimming controls.

The kit is designed to retrofit into an existing fluorescent fixture while reusing the fixture housing and lamp sockets when the lamp type, length, and count match.

Key Features

• For T5, 2 ft, 1-lamp fixtures
• 5000K color temperature
• 3-wire LED driver intended to pair with 3-wire Lutron dimmers
• Dimming to 1% with compatible Lutron controls
• Reuses existing fixture housing and lamp sockets when compatible

What this kit does

The 3LD2T5-1M50-24 converts a single 2 ft T5 fluorescent lamp fixture to a dimmable LED solution and is supplied as an LED ballast/driver configured for one T5 lamp with a 5000K output.

Where to use it

Suitable for retrofitting single-lamp 2 ft T5 fixtures in commercial and institutional environments where that fixture type is present.

• Typical settings where this retrofit is used: offices, schools, retail spaces, warehouses

Compatibility and control pairing

The kit includes a 3-wire LED driver intended to pair with 3-wire Lutron dimmers. Dimming to 1% is supported when used with a compatible Lutron control.

• 3-wire wiring (ballast / LED driver) — intended for use with 3-wire Lutron dimming controls
• Verify specific dimmer compatibility with Lutron documentation prior to installation

Key specifications

Quick reference specifications for the 3LD2T5-1M50-24.

• Brand: Lutron
• Model / SKU: 3LD2T5-1M50-24
• Product type: Ballast & LED Driver (LED retrofit kit)
• Lamp type: T5
• Lamp length: 2 ft
• Lamp count: 1
• Color temperature: 5000K
• Wiring: 3-Wire (Ballast / LED-Driver)
• Dimming range: 1% (with compatible Lutron control)
• UPC: 784276321297

Installation considerations

Verify the retrofit kit matches the existing fixture's lamp type, length, and lamp count before ordering and installation.

• Confirm the fixture contains a single 2 ft T5 lamp socket configuration
• Match the kit model number to the existing lamp type, length, and count
• Confirm dimmer/control compatibility with Lutron documentation if dimming is required

Before You Order

Confirm the existing fixture is a single 2 ft T5 lamp and that the kit model matches that configuration.

• Match kit to existing lamp type (T5), lamp length (2 ft) and lamp count (1)
• Verify dimmer compatibility with Lutron documentation if dimming to 1% is required

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron LED Ballast Retrofit Kit T5 5000K (3LD2T5-1M50-24). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.