Lighting Spot 26 192W 24V LED Driver LS26-EB-192W

Product Overview

The Lighting Spot 26 LS26-EB-192W is a dedicated LED driver specified for a 24V output and a maximum load of 192W. It is intended for use as a replacement or component in lighting installations, maintenance, and contractor inventories.

This SKU (LS26-EB-192W) is identified for ordering and specification tasks where exact driver voltage and wattage are required.

Key Features

• Model/SKU: LS26-EB-192W for clear ordering and replacement
• Output rating: 192W maximum load
• Output voltage: 24V
• Form factor: LED driver (electrical component for LED lighting systems)

What this driver does

The LS26-EB-192W provides a regulated 24V DC output to power LED modules and fixtures that require a 24V LED driver. It is specified with a maximum output capacity of 192W, making it suitable for multi-module or higher-load 24V LED applications where an exact-match replacement driver is needed.

Electrical output and load

Use the LS26-EB-192W when the fixture or LED assembly specifies a 24V driver and a maximum wattage at or below 192W. Confirm that the combined LED load does not exceed the 192W rating to avoid overload.

• Output voltage: 24V
• Maximum output (wattage): 192W

Intended applications

This driver is targeted for contractor supply, lighting maintenance, replacement projects, and commercial facility installations where a 24V/192W LED driver is required.

• Electrical service work
• Lighting maintenance and replacement
• Contractor and facility inventories
• Commercial lighting projects

Compatibility and installation notes

Confirm fixture and system compatibility before ordering or installing the LS26-EB-192W. Ensure the fixture’s required voltage, wattage, mounting constraints, dimming method, and local electrical codes match the driver’s specifications.

• Verify fixture requires a 24V driver and does not exceed 192W total load
• Check dimming compatibility and control method with the fixture/driver pairing
• Confirm housing, trim, module, or accessory fitment for recessed applications

Before You Order

Confirm the model number and quantity required before ordering. Verify that your fixture or LED assembly specifies a 24V driver and that the total LED load does not exceed 192W. Review dimming method, mounting space, and local electrical code requirements prior to installation.

• Confirm fixture voltage requirement is 24V
• Ensure combined LED wattage ≤ 192W
• Check dimming/control compatibility with the driver
• Verify physical fit and installation requirements for your application

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lighting Spot 26 192W 24V LED Driver LS26-EB-192W. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.