Lighting Spot 26 3W 395lm 5000K Gray Aluminum, Dark Gray Aluminum LED Wall Light LS2-1880-DG

Product Overview

The Lighting Spot 26 LS2-1880-DG is an outdoor LED wall light specified at 3W and 395 lumens with a 5000K color temperature and a photocell sensor. The fixture is finished in gray/dark gray aluminum and is identified by model LS2-1880-DG for ordering and replacement.

Verify mounting, voltage, and local code requirements before installation.

Key Features

• Model/SKU: LS2-1880-DG
• Power: 3W
• Light output: 395 lm
• Color temperature: 5000K
• Finish: Gray Aluminum, Dark Gray Aluminum
• Photocell sensor
• Intended for outdoor wall-mounted use

Function and intended use

The LS2-1880-DG is an LED wall-mounted fixture intended for outdoor perimeter and exterior building lighting. The product listing identifies typical uses such as walkways, service areas, and building exteriors.

• Wall-mounted outdoor fixture for area illumination and perimeter visibility
• Referenced for use by electricians, builders, and facility managers for replacements and upgrades

Light output and color

The fixture is specified to produce 395 lumens from a 3W LED source with a 5000K color temperature. Use these values to compare relative brightness and color when planning layouts.

• Output: 395 lm
• Power: 3W
• Color temperature: 5000K

Controls and sensor

The LS2-1880-DG is listed with a photocell sensor for automatic operation based on ambient light levels.

• Integrated photocell sensor (dusk-to-dawn type behavior is implied by a photocell listing)
• Confirm photocell behavior and site control requirements prior to installation

Finish and exterior suitability

The fixture is described with gray and dark gray aluminum finishes. Use the finish information to match existing exterior hardware and aesthetics.

• Finish: Gray Aluminum, Dark Gray Aluminum
• Verify mounting surface and environmental exposure for suitability

Ordering and installation notes

Confirm the exact model number (LS2-1880-DG) and required quantity before ordering. Verify that the fixture meets the project’s mounting and electrical requirements and local codes.

• Model/SKU for ordering: LS2-1880-DG
• Case quantity: 2
• Verify mounting method, site voltage, and local code compliance prior to installation

Before You Order

Confirm the model number and quantity required and verify mounting, voltage, and local code requirements.

• Confirm model: LS2-1880-DG
• Verify mounting method and site voltage

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lighting Spot 26 3W 395lm 5000K Gray Aluminum, Dark Gray Aluminum LED Wall Light LS2-1880-DG. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.