Lighting Spot 26 96W 24V LED Driver LS-96W-24V-E

Product Overview

The Lighting Spot 26 LS-96W-24V-E is a single‑SKU LED driver specified for 96 watts and 24 volts output. It is intended for contractors, electricians, and facility managers who need a direct replacement or matching driver for lighting installations and maintenance.

SKU LS-96W-24V-E is provided to simplify ordering and inventory matching for service, remodel, or new construction projects.

Key Features

• Model/SKU: LS-96W-24V-E for straightforward identification and replacement
• Electrical rating: 96W maximum output
• Output voltage: 24V
• Intended for contractor and maintenance applications

Function and intended use

The LS-96W-24V-E provides low-voltage power conversion for LED lighting loads. It is specified as a 24V output driver with a 96W maximum output and is used for fixture replacement, repair, or new installations that require an external LED driver.

• Intended users: contractors, electricians, and maintenance personnel
• Purpose: replace or match an LED driver with 24V, up to 96W output

Electrical rating and output

This product is specified with a 24V output and a maximum wattage of 96W. Use these values to confirm the driver matches the connected LED module or fixture electrical requirements.

• Output voltage: 24V
• Maximum output/wattage: 96W

Common applications

Typical uses include lighting maintenance, replacement projects, and contractor inventory where an exact driver match is required. The product listing is presented for commercial and service-oriented applications.

• Lighting maintenance and electrical service work
• Contractor inventory and replacement projects
• Commercial facility lighting applications

Compatibility and installation considerations

Before ordering or installing this driver, confirm compatibility with the fixture and project requirements. Verify fixture voltage, total wattage of connected LEDs, physical mounting space for the driver, dimming method if applicable, and compliance with local electrical codes.

• Confirm fixture model, required voltage, and cumulative LED wattage do not exceed 96W
• Verify physical mounting space and housing/trim compatibility when applicable
• Check dimming compatibility if dimming is required and follow local electrical codes

Before You Order

Confirm the model number and electrical requirements match your fixture and project needs before ordering.

• Confirm model: LS-96W-24V-E
• Confirm required output voltage (24V) and total fixture wattage (do not exceed 96W)

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lighting Spot 26 96W 24V LED Driver LS-96W-24V-E. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.