LED-DRJ Series 12V DC, 300W, Non-Dimmable LED Driver w/junction box

Product Overview

The LED-DRJ Series LED-DRJ-300-12 is a 300W, 12V DC non-dimmable LED driver supplied with an integrated junction box for hardwired connections.

Designed for use where a constant 12V DC supply is required, this driver is sold as a single unit (SKU: LED-DRJ-300-12).

Key Features

• Output: 12V DC at up to 300 watts
• Non-dimmable constant-voltage driver
• Includes integrated junction box for hardwired installation
• Sold individually (SKU: LED-DRJ-300-12)

What this driver does

The LED-DRJ-300-12 provides a regulated 12V DC constant-voltage output for LED fixtures and strip lighting requiring up to 300 watts. It is non-dimmable, so it supplies a stable 12V output without dimming control.

• Intended to power 12V DC LED loads up to a combined total of 300W.
• Non-dimmable: no compatibility with phase, TRIAC, or low-voltage dimming controls.

Electrical and load requirements

Match the driver’s 12V DC output and 300W capacity to the combined requirements of your LED fixtures. Do not exceed the rated wattage.

• Output voltage: 12V DC
• Maximum output power: 300W (aggregate load)

Installation and junction box

This SKU includes an integrated junction box to facilitate hardwired connections for line and load conductors. Use appropriate wiring practices and local electrical codes when making connections.

• Designed for hardwired installation in electrical enclosures or accessible junction locations.
• Confirm compatible wire gauges, conduit, and overcurrent protection per local code.

Key specifications

Quick reference for ordering and technical identification.

• Manufacturer/Brand: American Lighting
• Model / SKU: LED-DRJ-300-12
• Output: 12V DC
• Power: 300W
• Dimming: Non-dimmable
• Sold as: Each

Before You Order

Confirm the model number and quantity required before ordering. Verify that your LED fixtures are 12V DC and that their combined wattage does not exceed 300W. Follow local electrical codes for installation.

• Confirm LEDs require 12V DC and total load ≤ 300W.
• Non-dimmable: do not plan for dimming control with this driver.
• If unsure about wiring, consult a licensed electrician.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for LED-DRJ Series 12V DC, 300W, Non-Dimmable LED Driver w/junction box. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.