High Output Tape Light IP54 RGBW 16.4Ft

Product Overview

HTL-RGBW is a 16.4 ft reel of high-output RGBW LED tape light with IP54 splash resistance. It uses 5050 LED packages with alternate warm-white diodes to provide RGB color plus a separate white channel and is supplied with a 5‑pin RGB+W connector and 6' cable.

Electrical identity listed as 24 V DC and a per-foot power figure appears in the listing; exact system power should be confirmed when planning drivers and wiring.

Key Features

• Length: 16.4 ft reel — SKU HTL-RGBW
• Ingress protection: IP54 (splash resistant)
• Nominal voltage: 24 V DC
• LED package: 5050 with alternate warm-white LEDs
• Color channels: RGB plus separate white (RGBW) via 5‑pin connector
• CRI: 80+
• Cuttable at 6.56" intervals
• Connector: 12 mm tape with 5‑pin (RGB+W) TL-4PWR-HD connector and 6' pigtail cable
• Listed lumen value: 240

What this tape light does

This product (HTL-RGBW) is a 16.4 ft RGBW LED tape that combines 5050 RGB LED packages with alternate warm-white LEDs to provide RGB color effects plus a separate white channel. The listing includes an 80+ CRI specification.

• RGB + separate white channel via a 5‑pin connection
• Listed lumen output: 240
• LED package: 5050 with alternate warm-white diodes

Electrical and power details

The tape is specified for 24 V DC operation. The product text lists a per-foot wattage figure and the variant line lists a closely related value; confirm exact power consumption for system planning.

• Nominal voltage: 24 V DC
• Power: catalog text lists 4.6 W/ft; variant lists 4.4 W (use installer/designer for final calculations)
• Select a compatible 24 V constant-voltage driver sized for the actual measured/verified load

Connections, cut points and installation interfaces

The tape is 12 mm wide and is shown with a 5‑pin TL-4PWR-HD (RGB+W) connector and a 6' cable/pigtail. The tape is cuttable at specified intervals per the listing.

• Connector: 5‑pin (RGB+W) TL-4PWR-HD with 6' cable
• Cut points: every 6.56 inches
• Sold as a single 16.4 ft reel

Dimensions and mechanical details

Physical details from the listing describe the tape as narrow and lightweight, suitable for many accent installations. Confirm mounting surface and clearances prior to installation.

• Reel length: 16.4 ft
• Width: 12 mm (listed as 0.03 ft)
• Weight: 1.25 lb

Suitable locations

The tape carries an IP54 rating, indicating splash resistance. Use that rating to assess whether the tape is appropriate for the intended indoor or protected outdoor location.

• IP54 indicates splash resistance; evaluate site conditions to confirm suitability

Before You Order

Confirm HTL-RGBW is the intended SKU and verify driver/controller compatibility for 24 V RGBW tape before ordering.

• Confirm you need a 24 V DC constant-voltage driver and an RGBW controller that accepts a 5‑pin RGB+W connection.
• Check that IP54 splash resistance is suitable for your installation location.
• Verify the per-foot power figure with your installer when calculating total load (catalog shows 4.6 W/ft; variant lists 4.4 W).

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for High Output Tape Light IP54 RGBW 16.4Ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.