High Output Tape Light IP54 RGBW 100Ft

Product Overview

High-output RGBW tape light engineered for damp-location accent and cove lighting with an IP54 rating.

One 100 ft reel (SKU HTL-RGBW-100) using 24V 5050 LED modules, rated at 4.6 W per foot and CRI 80+.

Key Features

• Length: 100 ft reel, single SKU HTL-RGBW-100
• Color: RGBW (red, green, blue plus separate white channel)
• Power: 24 V DC, 4.6 W per foot
• LED package: 5050 3-in-1 plus separate white alternates
• Ingress protection: IP54 (splash/dust resistant)
• Connectors: 12 mm 5‑pin (RGB+W) connectors with 6' cable

What this tape light does

This SKU, HTL-RGBW-100, is a high-output RGBW LED tape light supplied on a 100 ft reel for continuous accent, cove, and architectural lighting runs. The RGBW configuration provides red, green, blue plus a separate white channel for color mixing and true white output.

• Designed for long runs and continuous color effects
• Separate white channel allows dedicated white light in addition to color mixing

Electrical and power information

The tape light operates at 24 V DC with a nominal power consumption of 4.6 W per foot. Use appropriate 24 V power supplies sized for the total wattage of the installed run and account for voltage drop on long runs.

• Voltage: 24 V DC
• Power: 4.6 W per foot (specified on product data)

Physical length and light output

This product is supplied as a single 100 ft reel. Photometric values are provided as lumens per foot for planning light levels.

• Reel length: 100 ft
• Reported lumen value: 240 (catalog listing)

Connections and control compatibility

The reel is equipped with 12 mm 5‑pin connectors for RGB+W wiring and includes a 6' pigtail cable. The 5‑pin configuration corresponds to separate channels for red, green, blue, white and common/ground, and requires controllers/drivers that accept RGBW tape inputs.

• Connector type: 12 mm 5‑pin (RGB+W)
• Includes: 6' cable attached to the reel
• Control: Requires RGBW-capable controller and 24 V driver

Environmental suitability

This tape light carries an IP54 rating, indicating protection against limited dust ingress and splashing water. It is suitable for damp indoor or semi-exposed locations where occasional splashes occur but is not rated for full immersion.

• IP rating: IP54 (splash/dust resistant)
• Recommended for: indoor damp locations, protected exterior applications where full submersion is not possible

Before You Order

Confirm the model number (HTL-RGBW-100) and the quantity of reels required before ordering. Verify controller and 24 V power supply compatibility for RGBW tape and plan for voltage drop on long runs.

• Confirm compatible RGBW controller and 24 V driver sized for total wattage.
• Account for voltage drop — long continuous runs may require power at intervals or multiple feeds.
• Verify IP54 suitability for the intended installation environment.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for High Output Tape Light IP54 RGBW 100Ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.