High Output COB Tape Light IP54 100Ft

Product Overview

100 ft reel of high-output COB (Chip-on-Board) tape light with IP54 rating. This listing documents the HTL-COB-CW-100 5000K (cool white) variant.

Key measured values for the 5000K SKU: 4.5 watts per foot, 448 lumens per foot, CRI 90+, and 1.96" cut increments. Tape width is 0.03".

Key Features

• 100 ft reel length for long continuous runs.
• Rated power: 4.5 W per foot (5000K SKU).
• Reported lumen output: 448 lm per foot (5000K SKU).
• Color rendering: CRI 90+.
• Ingress protection: IP54.
• Field cut intervals: 1.96 inches.

What this tape light does

This 100 ft reel of COB tape light provides continuous linear illumination intended for accent and general linear lighting where a narrow, continuous light source is required.

• Designed to provide a continuous line of light using COB construction.
• Sold as the tape light reel only; installation accessories are not included.

Performance and light output

The HTL-COB-CW-100 (5000K) variant is specified at 4.5 W per foot and 448 lumens per foot with CRI listed as 90+.

• Power: 4.5 W/ft (5000K SKU).
• Light output: 448 lm/ft (5000K SKU).
• Color temperature: 5000K; CRI: 90+.

Size, cut increments and physical details

The tape is supplied on a 100 ft reel and is very narrow. It can be cut at the marked intervals shown on the tape.

• Reel length: 100 ft.
• Width: 0.03 in.
• Cut increment: 1.96 in — cut only at marked intervals.

Ingress protection and suitable environments

The product is specified with an IP54 rating. IP54 indicates protection against limited dust ingress and protection from water splashes from any direction.

• Ingress protection: IP54.
• Use cases and additional protection should be evaluated per project requirements; the tape is not described as submersible.

Accessories, power and installation notes

This listing covers the tape light reel only. Power supplies, connectors, mounting channels, dimmers and control interfaces are not included and must be selected separately.

• Select appropriate constant-voltage drivers and controls to match system voltage and total load.
• Plan for connectors or terminations at cut points; follow accepted workmanship and safety practices.

Before You Order

This page documents the HTL-COB-CW-100 (5000K) SKU. Other 100 ft variants are available in 2700K, 3000K, 3500K and 4000K; confirm you have selected the correct SKU and color temperature.

• Confirm total run length and required power supply capacity before purchase.
• Plan for mounting channels, connectors and any additional environmental protection separately; these items are not included.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for High Output COB Tape Light IP54 100Ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.