EnVision – M-Line Trunnion LED-ARL-2P50-TRI-TR-PC

Product Overview

The EnVision M-Line Trunnion (LED-ARL-2P50-TRI-TR-PC) is a commercial LED flood light with selectable wattage and color temperature for flexible specification.

Available in two wattage modes (50W and 35W) with corresponding lumen outputs, selectable 3000K/4000K/5000K color temperatures, 120–277V input, 0–10V dimming, and an IP65 wet-location rating.

Key Features

• Selectable wattage: 50W or 35W
• Lumen output: 7,000 lm (50W) or 4,900 lm (35W)
• Selectable color temperatures: 3000K / 4000K / 5000K
• Input voltage: 120–277V
• Dimming: 0–10V
• CRI: >80
• Beam angle: 120°
• IP rating: IP65 (wet locations)
• Certifications/Warranty: UL listed, DLC Premium, 5-year limited warranty
• Finish options: White or Bronze (two SKUs)

What this fixture is for

A commercial-grade LED flood light offering selectable output and color temperature for flexible specification and site adjustment.

• Designed for outdoor floodlighting and general exterior illumination where selectable output and color temperature are needed
• Trunnion mount allows aiming adjustment

Light output and selectable settings

Two wattage modes and three color temperature settings allow choosing between higher output or lower-energy modes and different light appearance.

• Wattage: selectable 50W or 35W
• Lumen output: 7,000 lm at 50W; 4,900 lm at 35W
• Color temperature options: selectable 3000K, 4000K, 5000K
• Beam angle: 120°
• Color rendering: CRI >80

Electrical and dimming

Standard commercial voltage input and a 0–10V analog dimming interface are listed for this fixture.

• Input voltage: 120–277V
• Dimming control: 0–10V

Environmental and listing information

Ratings and listings indicate suitability for wet locations and recognized safety/efficiency listings.

• IP65 — wet-location rated
• UL listed
• DLC Premium designation
• Manufacturer-backed 5-year limited warranty

Available finishes and SKUs

Two finish variants are offered under this product handle. Choose the SKU that matches the finish required.

• LED-ARL-2P50-TRI-WH-TR-PC — Finish: White
• LED-ARL-2P50-TRI-BZ-TR-PC — Finish: Bronze

Before You Order

Verify the SKU/finish you need before ordering.

• Select LED-ARL-2P50-TRI-WH-TR-PC for White or LED-ARL-2P50-TRI-BZ-TR-PC for Bronze.
• Confirm the selectable color temperature and wattage setting will be set during installation.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EnVision – M-Line Trunnion LED-ARL-2P50-TRI-TR-PC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.