EnVision LED-DLJBX-4B-7W-40K – SnapTrim-Line

Product Overview

The EnVision LED-DLJBX-4B-7W-40K is a 4" SnapTrim commercial recessed downlight with an integrated junction box, delivering 7W and 550 lumens at 4000K with CRI >90.

The SnapTrim design uses spring clips and a built-in J‑Box to install into a 4" ceiling cutout without a separate recessed can. The fixture is IC rated, airtight, UL wet-location listed, dimmable, and carries a 5-year limited warranty.

Key Features

• 7W power consumption, 550 lumens at 4000K with CRI >90
• Integrated junction box and spring-clip SnapTrim installation — no separate can required
• IC rated and airtight
• UL listed for wet locations
• Dimmable; manufacturer notes compatibility with most dimmers down to 5%
• White finish, 4" size; manufacturer family lists approximately 100° beam spread for the 4" SnapTrim line

What this fixture does

The EnVision LED-DLJBX-4B-7W-40K is a 4" recessed downlight intended for new construction or remodel applications. Its SnapTrim-Line design replaces the need for a separate recessed can by using an integrated junction box and spring clips so the trim snaps flush into a 4" ceiling cutout.

• Purpose: recessed downlighting for new construction or remodels
• Trim style: SnapTrim flush-mount with integrated J-Box

Mounting and installation

Installers cut a 4" hole in the ceiling, hardwire into the integrated junction box, and snap the fixture into place using the supplied tension clips. The product includes a ceiling bracket and the manufacturer offers a compatible new-construction plate accessory.

• Integrated junction box eliminates the need for a separate recessed can
• Includes spring clips and ceiling bracket for flush installation
• Manufacturer installation steps: cut hole → remove knock-out → hardwire J‑Box → snap fixture into cutout

Light output and performance

This SKU produces 550 lumens at 4000K with a color rendering index greater than 90, providing neutral-cool general illumination suitable for commercial interiors.

• Wattage: 7W
• Lumens: 550 lm
• Color temperature: 4000K
• CRI: >90
• Beam spread: manufacturer family listing shows approximately 100° for the 4" SnapTrim line

Electrical and dimming

The LED-DLJBX-4B-7W-40K is a 120V hardwired fixture that connects via its integrated junction box. The manufacturer states the product is dimmable and compatible with most dimmers down to 5%; final compatibility depends on the dimmer model.

• Voltage: 120V
• Dimmable: Yes — manufacturer notes compatibility with most dimmers to 5% (confirm with dimmer manufacturer)

Ratings and warranty

Per manufacturer documentation, the fixture is IC rated and airtight, UL listed for wet locations, JA8 compliant, and covered by a 5-year limited warranty.

• IC rated and airtight
• UL listed — suitable for wet locations
• JA8 compliant
• 5-year limited warranty

Before You Order

Confirm the model number and quantity required before ordering and verify the ceiling cutout size and local code requirements for recessed lighting installations.

• This SKU is a hardwired fixture with an integrated junction box — plan for direct wiring to a switched circuit.
• If using dimming, test with the intended dimmer model as final compatibility can vary by dimmer manufacturer.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EnVision LED-DLJBX-4B-7W-40K – SnapTrim-Line. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.