EnVision 6'-WHIP-1/2KO – 6' Whip - 3-Wire

Product Overview

The EnVision 6'-WHIP-1/2KO is a 6-foot, 3-wire field whip accessory documented for use with EnVision Slim-Line Linear Highbay fixtures.

This accessory is listed in EnVision product materials with manufacturer UPC 819715028847.

Key Features

• 6-foot length, three-conductor wiring whip
• Documented accessory for EnVision Slim-Line Linear Highbays (3-Power Select family)
• Accessory code: 6'-WHIP-1/2KO
• Manufacturer UPC: 819715028847

What this accessory does

The 6'-WHIP-1/2KO is a six-foot, three-conductor wiring whip intended as a field accessory for EnVision Slim-Line Linear Highbay fixtures. It provides a pre-measured cable option where a whip is required instead of the no-whip factory configuration.

• Accessory type: 6' whip (three-wire)
• Purpose: provides a factory-documented wiring length option for connecting the highbay to building power

Compatibility and application

EnVision lists the 6'-WHIP-1/2KO as an accessory for its Slim-Line Linear Highbay 3-Power Select series. The manufacturer’s materials show this whip alongside other options (no whip and 10' whip) for that fixture family.

• Documented compatible series: EnVision Slim-Line Linear Highbays (3-Power Select)
• Other documented whip options in the same accessory table: no whip, 10' whip

Installation and mounting considerations

The whip is intended to be used with the fixture’s wiring knockouts. The Slim-Line Linear Highbay specification sheet shows 1/2" top and 2 1/2" side knockouts on the fixture family; verify the exact fixture model’s knockout layout before installation.

• Intended for use with the fixture’s knockouts as shown in the product specification sheet
• Follow applicable local electrical codes and standard wiring practices during installation

Technical identifiers

Use these identifiers when specifying or ordering the accessory. The whip is listed in EnVision accessory tables as 6'-WHIP-1/2KO.

• Model / SKU: 6'-WHIP-1/2KO
• UPC: 819715028847
• Accessory family: EnVision Linear Highbay whips (documented alongside 10'-WHIP-1/2KO)

Before You Order

Confirm the highbay fixture model and required whip length before ordering.

• Verify the fixture model and knockout configuration for compatibility
• Confirm quantity and any project-specific requirements (for example, if a custom whip length is needed)

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EnVision 6'-WHIP-1/2KO – 6' Whip - 3-Wire. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.