EnVision 10'-WHIP-1/2KO – 10' Whip - 3-Wire

Product Overview

The EnVision 10'-WHIP-1/2KO is a 10-foot, three-conductor field whip accessory documented for use with EnVision Slim‑Line Linear Highbay fixtures. It provides a factory-compatible wiring whip option for routing power to the fixture.

The accessory is listed in EnVision product literature and is identified as the 10' whip option for their 3‑Power Selectable linear highbay family.

Key Features

• 10-foot length whip for field wiring
• Three-conductor configuration
• Documented accessory for EnVision Slim‑Line Linear Highbays (3‑Power Selectable series)
• UL Listed (as shown in EnVision documentation)

What this accessory does

The 10'-WHIP-1/2KO is a 10-foot, three-conductor field whip intended to provide a factory-compatible power connection for EnVision Slim‑Line Linear Highbay fixtures. It supplies reach from the fixture to a branch circuit or junction when a field-installed whip is preferred.

• Field-installed accessory for routing supply conductors to the fixture
• Provides 10' of flexible reach from the fixture

Compatibility and model use

EnVision lists the 10'-WHIP-1/2KO as the 10' whip accessory for their 3‑Power Selectable Slim‑Line Linear Highbay series, including the 2ft and 4ft configurations referenced in the product literature.

• Documented for use with EnVision LED-LHB linear highbay models in the 3‑Power Selectable family
• Intended to be used where the fixture has compatible knockout provisions

Installation and mounting notes

The whip is intended to be installed into the fixture knockouts shown in EnVision literature (1/2" top knockout and side knockouts are referenced). Follow the fixture documentation and applicable local electrical codes for wiring method, connectors, and secure strain relief.

• Install into manufacturer-designated knockouts using appropriate connectors or strain relief
• Confirm local code requirements for wiring methods and conductor fill before installation

Certifications and ratings

EnVision documentation lists this accessory and identifies UL Listing for the product family. Refer to the fixture and accessory documentation for full listing and approvals.

• UL Listed (as shown in EnVision product literature)

Before You Order

Confirm the EnVision fixture model and knockout location (top or side) before ordering this whip.

• Verify the required whip length and conductor count for your installation.
• Ensure the wiring method and connectors meet local electrical code.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EnVision 10'-WHIP-1/2KO – 10' Whip - 3-Wire. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.