Enerlites In Wall PIR Occupancy/Vacancy Sensor Dual Relay Single Pole Ground Required 120/277V White DWOS-JD-W

Product Overview

The Enerlites DWOS-JD-W is an in‑wall PIR occupancy/vacancy sensor intended for single‑pole lighting control. It is rated for 120/277V and finished in white to match standard device plates.

The device requires a grounding conductor for installation and is offered for contractor and facility maintenance use.

Key Features

• PIR occupancy/vacancy sensing for on/off control
• Single‑pole switching configuration
• Rated for 120/277V
• White finish
• Requires a grounding conductor

What this sensor does

The DWOS-JD-W is a passive infrared (PIR) occupancy/vacancy sensor that controls lighting based on motion detection and vacancy/manual modes where applicable. It is configured for single‑pole switching.

• Occupancy/vacancy sensing for automatic on/off control
• Single‑pole switching

Electrical and wiring requirements

This unit is rated for 120/277V electrical systems and requires a grounding conductor at the device location. Verify the branch circuit voltage and presence of a grounding conductor before installation.

• Voltage: 120/277V
• Pole configuration: Single pole
• Grounding conductor required

Common applications and installation contexts

Suitable for lighting control upgrades and facility maintenance in commercial or residential settings where single‑pole control is required and a ground is available. The white finish is intended to match standard wall plates.

• Typical uses: lighting control upgrades, commercial buildings, facility maintenance
• Install in standard in‑wall device locations with a ground

Key specifications

Reference these specification points when confirming compatibility for ordering.

• Brand: Enerlites
• Model / SKU: DWOS-JD-W
• Product type: Occupancy/Vacancy Sensor (PIR)
• Voltage: 120/277V
• Pole configuration: Single pole
• Color/finish: White
• Installation note: Ground required

Before You Order

Verify the DWOS-JD-W is the correct SKU, that the branch circuit is 120 or 277V, and that a grounding conductor is present at the device location.

• Confirm DWOS-JD-W is the correct SKU for your application
• Verify branch circuit is 120/277V
• Ensure a grounding conductor is present at the device location

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Enerlites In Wall PIR Occupancy/Vacancy Sensor Dual Relay Single Pole Ground Required 120/277V White DWOS-JD-W. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.