Enerlites In Wall PIR Occupancy/Vacancy Sensor/0-10V Dimmer Single Pole 120/277V White DWODS-010-W

Product Overview

The Enerlites DWODS-010-W is an in-wall passive infrared (PIR) occupancy/vacancy sensor combined with a 0–10V dimmer for single-pole switching. It is finished in white and intended for lighting control upgrades in residential and commercial installations where verified device ratings are required.

This SKU integrates occupancy detection with 0–10V dimming control; verify load type and wattage of connected fixtures before installation.

Key Features

• Built-in PIR occupancy/vacancy sensing with integrated 0–10V dimming output
• Single-pole switching configuration
• White finish to match standard wallplates
• Designed for contractor and facility maintenance use

What this device does

The Enerlites DWODS-010-W combines a PIR occupancy/vacancy sensor with a 0–10V dimmer in a single in-wall unit configured for single-pole switching. It automatically controls lighting based on occupancy detection and provides a 0–10V control signal for compatible dimmable fixtures or drivers.

• Occupancy/vacancy sensing (PIR) integrated with dimming
• 0–10V dimming output compatible with fixtures and drivers that accept a 0–10V control input
• Single-pole control — intended to switch one lighting circuit

Voltage and load considerations

This model is identified with a 10V designation related to its 0–10V dimming interface. Confirm the dimmer load type and the total wattage of connected fixtures prior to installation to ensure compatibility and safe operation.

• 0–10V control interface (10V designation)
• Single-pole switching — check that the installation requires single-pole configuration
• Verify fixture/driver compatibility with 0–10V dimming

Recommended applications

The DWODS-010-W is suitable for lighting control upgrades and routine facility or commercial building installations where occupancy-based control and 0–10V dimming are required. Its white finish matches common wallplates and interiors.

• Commercial buildings and facility maintenance projects
• Lighting control retrofits where occupancy sensing and 0–10V dimming are needed
• Contractor-specified installations requiring verified device ratings

Installation and configuration notes

The unit is a single-pole in-wall device. Confirm the model number and the wiring configuration in the target location before ordering and installing. Follow local electrical codes and the fixture/driver manufacturer instructions when connecting the 0–10V control leads.

• Intended for single-pole in-wall installation
• Confirm dimmer load type and total wattage of connected fixtures prior to installation
• Follow applicable electrical codes and wiring best practices

Before You Order

Confirm the model number and quantity required before ordering. Verify the dimmer load type and the total wattage of the fixtures or drivers you plan to control. Ensure the target circuit is single-pole and that the fixtures accept 0–10V dimming control.

• Confirm DWODS-010-W is the correct SKU for the application
• Verify fixture/driver compatibility with 0–10V control and total load wattage
• Have a qualified electrician perform installation per local code

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Enerlites In Wall PIR Occupancy/Vacancy Sensor/0-10V Dimmer Single Pole 120/277V White DWODS-010-W. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.