EMCOD ML96S24AC Indoor Outdoor Magnetic AC Driver 96W 24VAC C2

Product Overview

The EMCOD ML96S24AC is an indoor/outdoor magnetic AC driver for low-voltage lighting fixtures, with 24V AC output and a 96W maximum load.

It is a dimmable, hard-wire power supply. Described applications include halogen and xenon lighting, and AC landscape or architectural lighting circuits.

Key Features

• 24V AC output with a 96W maximum load
• Dimmable magnetic hard-wire power supply
• AC boost tap to compensate for voltage drop on long runs
• Primary manually reset circuit breaker
• Two-section bobbin provides insulation between primary and secondary sides
• Polyester resin encapsulation for quiet operation
• Outdoor enclosure rating: NEMA 3R or IP24

24V AC Output and 96W Maximum Load

The ML96S24AC supplies 24V AC and has a maximum load of 96W. Its class designation is C2.

Dimming and Driver Features

This model is a dimmable magnetic hard-wire power supply. It has an AC boost tap to compensate for voltage drop on long runs and a primary manually reset circuit breaker.

• A two-section bobbin provides insulation between the primary and secondary sides.
• Polyester resin encapsulation is described as providing quiet operation.

Lighting Applications

Described applications include low-voltage lighting fixtures, halogen lighting, xenon lighting, and AC landscape or architectural lighting circuits.

Enclosure Rating and Dimensions

The outdoor enclosure rating is NEMA 3R or IP24. Dimensions are H 8.13, W 3.93, and D 1.59; units are not specified.

Before You Order

Check that the 24V AC output and 96W maximum load suit the intended lighting circuit.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML96S24AC Indoor Outdoor Magnetic AC Driver 96W 24VAC C2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.