EMCOD ML75S24AC Indoor Outdoor Magnetic AC Driver 75W 24VAC C2

Product Overview

The EMCOD ML75S24AC is a magnetic hard‑wire AC driver designed for low‑voltage lighting circuits. It provides a 24V AC output with a 75W maximum load and carries a C2 class designation.

Built for quiet operation and basic protection, the unit features a manually reset primary circuit breaker, a two‑section bobbin for primary/secondary insulation, an encapsulated polyester resin winding, and an outdoor‑rated enclosure (NEMA 3R / IP24).

Key Features

• 24V AC output for low‑voltage lighting (halogen, xenon, AC landscape and architectural lighting)
• 75W maximum load (SKU: ML75S24AC)
• Dimmable magnetic design with boost tap for voltage compensation on long runs
• Manual reset primary circuit breaker for overload protection
• Two‑section bobbin separating primary and secondary windings
• Polyester resin encapsulation for quiet operation
• Outdoor enclosure rated NEMA 3R / IP24

What this driver does

The ML75S24AC is a magnetic AC driver that steps down and supplies 24V AC for low‑voltage lighting circuits. It is intended for use with low‑voltage fixtures including halogen and xenon lamps, and AC landscape or architectural lighting systems.

Electrical output and load

This SKU provides a 24V AC output and is rated for a maximum load of 75W. The unit is described as dimmable when used with compatible magnetic control methods and includes a boost tap to help compensate for voltage drop on long cable runs.

• Output: 24V AC
• Max load: 75W (SKU ML75S24AC)
• Includes boost tap for voltage compensation
• Dimmable with compatible magnetic dimming systems

Protection, construction and quiet operation

The driver includes a manually reset primary circuit breaker as a standard protection feature. Construction details list a two‑section bobbin that provides insulation separation between the primary and secondary sides, and polyester resin encapsulation to reduce audible hum and vibration.

• Primary manually reset circuit breaker
• Two‑section bobbin for primary/secondary insulation
• Polyester resin encapsulation for quiet operation

Environmental and enclosure rating

The ML75S24AC is supplied in an enclosure rated NEMA 3R / IP24, making it suitable for many covered outdoor and indoor installations where protection from rain and light splashing is required. Confirm specific site conditions and mounting requirements before specifying for exposed locations.

• Enclosure rating: NEMA 3R / IP24

Dimensions and physical size

Use the listed physical dimensions to verify fit in the intended mounting location or luminaire housing.

• Height: 8.13 in
• Width: 3.93 in
• Depth: 1.59 in

Before You Order

Confirm the model number and quantity required before ordering. Verify that a 24V AC, 75W magnetic driver meets the voltage, wattage and dimming requirements for your fixtures and control system.

• Confirm compatibility with fixture type (halogen, xenon, AC landscape fixtures).
• Verify dimming method compatibility with magnetic drivers.
• Confirm enclosure rating (NEMA 3R / IP24) is appropriate for the installation location.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML75S24AC Indoor Outdoor Magnetic AC Driver 75W 24VAC C2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.