EMCOD ML60S24DC-B Indoor Outdoor Magnetic DC Driver 60W 24VDC Class 2

Product Overview

The EMCOD ML60S24DC-B is an indoor/outdoor magnetic DC driver for low-voltage lighting circuits. This model provides 24V DC output with a maximum load of 60W and a Class 2 designation.

The driver is described as dimmable and hard-wired. Its listed features include a manually reset primary circuit breaker, secondary protection for DC products, and an enclosure listed as NEMA 3R or IP24.

Key Features

• 24V DC output and 60W maximum load
• Class 2 designation
• Dimmable magnetic hard-wire power supply
• Primary manually reset circuit breaker and secondary protection
• Enclosure listed as NEMA 3R or IP24

24V DC Output and 60W Maximum Load

The ML60S24DC-B supplies 24V DC and has a maximum load rating of 60W. It is identified as a Class 2 magnetic DC driver for low-voltage lighting.

Lighting Applications and Dimming

This driver is identified for low-voltage LED, halogen, and xenon fixtures in indoor and outdoor lighting circuits. It is described as a dimmable, hard-wire power supply.

Protection and Enclosure Details

The listed protection features include a manually reset primary circuit breaker and secondary protection for DC products. The driver uses a two-section bobbin to provide insulation between primary and secondary sides and is encapsulated with polyester resin, described as supporting quiet operation.

Its enclosure is listed as NEMA 3R or IP24.

Before You Order

Confirm that the 24V DC output and 60W maximum load suit the intended lighting circuit.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML60S24DC-B Indoor Outdoor Magnetic DC Driver 60W 24VDC Class 2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.