EMCOD ML60S24AC Indoor Outdoor Magnetic AC Driver 60W 24VAC C2

Product Overview

The EMCOD ML60S24AC is a hard‑wire magnetic AC driver designed for low‑voltage lighting circuits. It provides a 24V AC output with a 60W maximum load and a C2 insulation/class designation.

The unit is encapsulated with polyester resin for quiet operation and is available in an enclosure rated NEMA 3R (IP24) for indoor or outdoor installations.

Key Features

• 60W maximum load with 24V AC output
• Dimmable magnetic hard‑wire power supply
• Boost tap included to compensate for voltage drop on long runs
• Primary manually reset circuit breaker
• Two‑section bobbin providing insulation between primary and secondary
• Polyester resin encapsulation for quiet operation
• Outdoor enclosure rated NEMA 3R / IP24

Function and intended use

The ML60S24AC is a magnetic hard‑wire AC driver used to supply low‑voltage lighting circuits. It converts mains power to 24V AC and is intended for halogen, xenon, and other low‑voltage AC lighting fixtures and for AC landscape or architectural lighting circuits.

Output and performance features

This unit provides a 24V AC output and supports a maximum load of 60 watts. The driver includes a boost tap to help compensate for voltage drop on long runs, and is described as dimmable when used with compatible magnetic dimming controls.

• Output: 24V AC
• Max load: 60W
• Boost tap to counteract voltage drop
• Dimmable with appropriate magnetic dimmers

Installation features and protections

The ML60S24AC incorporates practical protections and construction for reliable field use. A primary manually reset circuit breaker is standard. The two‑section bobbin provides insulation between primary and secondary windings, and the assembly is encapsulated with polyester resin for quieter operation.

• Primary manually reset circuit breaker included
• Two‑section bobbin for primary/secondary insulation
• Polyester resin encapsulation for reduced noise

Dimensions and physical details

Confirm physical size when planning installation: the manufacturer's dimensions are provided below. The enclosure is rated for indoor or outdoor use (NEMA 3R / IP24).

• Dimensions: H = 8.13 in, W = 3.93 in, D = 1.59 in
• Outdoor enclosure rating: NEMA 3R / IP24

Applications and compatible lighting types

The ML60S24AC is suited for low‑voltage lighting systems that require 24V AC. Typical applications listed by the manufacturer include low‑voltage lighting fixtures, halogen lighting, xenon lighting, and AC landscape or architectural lighting circuits.

Before You Order

Confirm the model number and quantity required before ordering. This page describes the single SKU ML60S24AC and the manufacturer‑supplied specifications listed above.

• Verify 24V AC output and 60W maximum load match your fixtures' requirements.
• Confirm compatibility with the dimming control you plan to use (this is a magnetic driver).

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML60S24AC Indoor Outdoor Magnetic AC Driver 60W 24VAC C2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.