EMCOD ML40S12DC Indoor Outdoor Magnetic DC Driver 40W 12VDC Class 2

Product Overview

The EMCOD ML40S12DC is a 40W magnetic DC driver with 12V DC output and a Class 2 designation. It is listed for low-voltage LED, halogen and xenon fixtures in indoor and outdoor lighting circuits.

This dimmable, hard-wire power supply has a manually reset primary circuit breaker and secondary protection. Its enclosure is rated NEMA 3R or IP24.

Key Features

• 40W maximum load with 12V DC output
• Dimmable magnetic hard-wire power supply
• Class 2 designation
• Manually reset primary circuit breaker and secondary protection
• Outdoor enclosure rated NEMA 3R or IP24

12V DC Output and 40W Maximum Load

The ML40S12DC provides 12V DC output and is rated for a maximum load of 40W. Check that the connected load and required output voltage suit this specific driver.

Fixture Types and Lighting Applications

This driver is listed for low-voltage LED, halogen and xenon fixtures, and for indoor and outdoor lighting circuits.

Dimming and Circuit Protection

The ML40S12DC is a dimmable magnetic hard-wire power supply. Its listed protection features include a standard manually reset primary circuit breaker and standard secondary protection for DC products.

• A two-section bobbin provides insulation between the primary and secondary sides.
• Polyester resin encapsulation is specified for quiet operation.

Enclosure Rating and Dimensions

The outdoor enclosure is rated NEMA 3R or IP24. Listed dimensions are H = 7, W = 2.11 and D = 1.54; no unit is stated for these measurements.

Before You Order

Confirm the connected load requires 12V DC and does not exceed the 40W maximum. The listed dimensions do not include a unit.

• Confirm the model number and quantity required before ordering.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML40S12DC Indoor Outdoor Magnetic DC Driver 40W 12VDC Class 2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.