EMCOD ML35S24DC Indoor Outdoor Magnetic DC Driver 35W 24VDC Class 2

Product Overview

The EMCOD ML35S24DC is a magnetic, hard-wired DC driver designed for low-voltage lighting loads requiring a 24V DC Class 2 supply.

It supports a maximum load of 35 watts, includes primary and secondary protection, and is provided in an outdoor-rated enclosure (NEMA 3R / IP24).

Key Features

• 35W maximum load with 24V DC output (Class 2)
• Magnetic hard-wire construction suitable for dimmable applications
• Primary manually reset circuit breaker and secondary protection
• Two-section bobbin for primary-to-secondary insulation and polyester resin encapsulation for quiet operation
• Outdoor-capable enclosure rated NEMA 3R / IP24

What this driver does

The ML35S24DC provides a regulated 24V DC Class 2 output for low-voltage lighting fixtures. It is a magnetic, hard-wired driver intended to convert AC supply to a 24V DC output suitable for LED, halogen, or xenon low-voltage loads up to the specified maximum wattage.

Power and output characteristics

Use the ML35S24DC when your circuit requires up to 35 watts at 24 volts DC under a Class 2 designation.

• Maximum load: 35W
• Output: 24V DC
• Class designation: Class 2

Protections and construction details

This driver includes safety and build features to support quiet, reliable operation and basic circuit protection.

• Primary manually reset circuit breaker is standard
• Secondary protection provided for DC products
• Two-section bobbin isolates primary and secondary windings
• Encapsulated in polyester resin to reduce noise
• Magnetic construction is compatible with certain dimming methods (verify dimmer compatibility with fixture and control)

Intended applications

The ML35S24DC is designed for low-voltage lighting circuits in both indoor and outdoor locations where a weather-resistant enclosure is required.

• Low-voltage LED fixtures
• Low-voltage halogen fixtures
• Low-voltage xenon fixtures
• Indoor and outdoor lighting circuits (NEMA 3R / IP24 enclosure)

Size and SKU information

Confirm the SKU and physical size to ensure fit in your installation location.

• SKU / Item Number: ML35S24DC
• Dimensions: H = 7, W = 2.11, D = 1.54 (units as provided by manufacturer data)

Before You Order

Confirm the model number and quantity required before ordering. Verify that a 24V DC Class 2, 35W driver matches the voltage and wattage requirements of your fixtures and that enclosure dimensions suit your mounting location.

• Confirm compatibility of dimming controls with magnetic drivers and with your specific fixtures.
• Verify installation complies with local electrical codes and that required wiring and mounting clearances are available.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML35S24DC Indoor Outdoor Magnetic DC Driver 35W 24VDC Class 2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.