EMCOD ML35S24AC Indoor Outdoor Magnetic AC Driver 35W 24VAC C2

Product Overview

The EMCOD ML35S24AC is a magnetic hard‑wire AC driver designed for 24V AC low‑voltage lighting circuits. It delivers up to 35W and is rated C2.

Engineered for indoor or outdoor use, the unit is polyester‑encapsulated for quiet operation and is supplied with a primary manual reset circuit breaker and a boost tap for voltage compensation on long runs.

Key Features

• 35W maximum load with 24VAC output
• Dimmable magnetic hard‑wire design suitable for low‑voltage fixtures
• Boost tap to compensate for voltage drop on long cable runs
• Primary manual reset circuit breaker included
• Two‑section bobbin isolates primary and secondary windings
• Polyester resin encapsulation for quiet operation
• Outdoor enclosure rated NEMA 3R / IP24

Function

The ML35S24AC is a magnetic AC driver for low‑voltage lighting applications. It provides a 24VAC secondary suitable for halogen, xenon, and other AC low‑voltage fixtures intended to run from a magnetic transformer.

Electrical output and load

This model outputs 24V AC and supports a maximum connected load of 35 watts. It is designated Class C2.

• Output: 24V AC
• Maximum load: 35W
• Class designation: C2

Installation and protective features

The unit is a hard‑wired magnetic transformer designed to be dimmable and includes installer‑level protective features to aid safe operation.

• Dimmable magnetic hard‑wire power supply
• Primary manual reset circuit breaker (standard)
• Two‑section bobbin provides insulation between primary and secondary

Environmental suitability

The ML35S24AC is packaged for indoor or outdoor use: the enclosure meets NEMA 3R and IP24 ratings. The transformer is encapsulated in polyester resin to reduce audible noise.

• Encapsulation: polyester resin for quiet operation
• Enclosure rating: NEMA 3R / IP24

Dimensions

Use the listed physical dimensions to confirm fit in your mounting location or enclosure.

• Height: 7 (units as provided by manufacturer)
• Width: 2.11
• Depth: 1.54

Before You Order

Confirm the model number and quantity required before ordering.

• Verify the 24VAC output and 35W maximum load match the requirements of your fixtures.
• Confirm the listed dimensions and enclosure rating (NEMA 3R / IP24) are appropriate for your installation location.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML35S24AC Indoor Outdoor Magnetic AC Driver 35W 24VAC C2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.