EMCOD ML20S24DC Indoor Outdoor Magnetic DC Driver 20W 24VDC Class 2

Product Overview

The EMCOD ML20S24DC is a 20W magnetic DC driver designed for low-voltage LED, halogen and xenon fixtures. It delivers a 24V DC Class 2 output in an encapsulated magnetic design.

Built for indoor or outdoor use, the unit features a manual-reset primary circuit breaker, secondary protection, two-section bobbin insulation and an encapsulated polyester resin construction for quiet operation.

Key Features

• 20W maximum load with 24V DC output (Class 2 designation)
• Dimmable magnetic hard-wire power supply
• Primary manual-reset circuit breaker and secondary protection
• Two-section bobbin for insulation between primary and secondary
• Encapsulated with polyester resin for quiet operation
• Outdoor enclosure rated NEMA 3R / IP24
• SKU: ML20S24DC; UPC: 810064710421

What this driver does

The ML20S24DC converts line power to a regulated 24V DC Class 2 output suitable for low-voltage lighting. It is intended for use with low-voltage LED fixtures and is also listed for halogen and xenon fixtures in manufacturer documentation.

• Output: 24V DC, Class 2
• Rated for low-voltage LED, halogen, and xenon fixtures (as specified by manufacturer)

Electrical and physical specifications

Key electrical and size details describe the driver’s capacity and form factor.

• Maximum load: 20W
• Output voltage: 24V DC
• Class designation: Class 2
• Dimensions: H = 7, W = 2.11, D = 1.54 (manufacturer-provided dimensions)
• SKU / Item number: ML20S24DC
• UPC: 810064710421

Protection and enclosure

The ML20S24DC includes both primary and secondary protective features and an outdoor-capable enclosure to support safe operation in exposed locations.

• Primary manually reset circuit breaker is standard
• Secondary protection provided for DC output
• Two-section bobbin provides insulation between primary and secondary sides
• Encapsulated with polyester resin for quiet operation
• Enclosure rating: NEMA 3R / IP24 (suitable for limited outdoor exposure as specified)

Installation and application notes

This magnetic hard-wire power supply is intended for hard-wired installation. It is described as dimmable in manufacturer notes; confirm dimmer compatibility with your fixtures and control system before installation.

• Dimmable magnetic driver — verify compatible dimmer type with lighting load
• Hard-wire installation: follow local electrical code and industry best practices
• Manufacturer lists use for indoor and outdoor lighting circuits

Before You Order

Confirm the model number and quantity required before ordering. Verify dimmer compatibility and that a 24V DC, 20W Class 2 supply meets your fixture and circuit requirements.

• Confirm compatibility with your fixture type (LED, halogen, xenon) and chosen dimmer.
• Ensure installation complies with local electrical code and is performed by qualified personnel.
• Verify the physical dimensions fit your mounting location.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML20S24DC Indoor Outdoor Magnetic DC Driver 20W 24VDC Class 2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.