EMCOD ML10S24DC Indoor Outdoor Magnetic DC Driver 10W 24VDC Class 2

Product Overview

The EMCOD ML10S24DC is an indoor/outdoor magnetic DC driver for low-voltage lighting fixtures. It provides 24V DC output and has a maximum load of 10W.

This Class 2 driver is a dimmable, hard-wire power supply. Its listed features include a manually reset primary circuit breaker, secondary protection for DC products, and an outdoor enclosure rated NEMA 3R or IP24.

Key Features

• 24V DC output with a 10W maximum load
• Dimmable magnetic hard-wire power supply
• Class 2 designation
• Primary manually reset circuit breaker and secondary protection for DC products
• Outdoor enclosure rated NEMA 3R or IP24

24V DC Output and 10W Maximum Load

The ML10S24DC provides 24V DC output and supports a maximum load of 10W. It is listed for use with low-voltage LED fixtures; the product information also identifies halogen and xenon fixtures.

Dimming and Circuit Protection

This model is a dimmable magnetic hard-wire power supply with a Class 2 designation. Its listed protection features include a manually reset primary circuit breaker and secondary protection for DC products.

• A two-section bobbin provides insulation between the primary and secondary sides.
• The driver is encapsulated with polyester resin for quiet operation.

Indoor/Outdoor Enclosure and Dimensions

The product is identified as an indoor/outdoor magnetic DC driver. Its outdoor enclosure is listed as rated NEMA 3R or IP24. Listed dimensions are H = 7, W = 2.11, D = 1.54; no unit is specified.

Before You Order

Confirm that the 24V DC output and 10W maximum load suit the intended lighting setup.

• Confirm the model number and quantity required before ordering.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EMCOD ML10S24DC Indoor Outdoor Magnetic DC Driver 10W 24VDC Class 2. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.